anjupc
  Quantity_20toh
 

 
 

 

 

Semi-Automated Sorting Plant

Throughput up to 20t/h

with sorting stage and sorting cabin

and 2 optical detection devices

Project no.

 

General product data

Input : Domestic waste

Volume : 23t/h

Number of shifts : 1

Working days : 250

Hours/shift : 7

Material data

Domestic waste with a dry-substance content of at least 70%

The proportion of biogenic material is 40% of the input. 90% thereof with < 90mm grain size.

90% of the input is supplied loose.

The delivered goods are not pressed.

The bulk weight is 300kg/m³ (values always for loosely dumped bulk)

Note:

The contractor informs that the materials sorted by the customer may cause overheating. Wastes

frequently contain materials that may cause fires. The plant must be continuously monitored in order

to prevent fire damage. A fire monitoring system should be installed. Further, the plant should be

maintained free of dust and dirt. Especially, dirt must be removed, also outside of the plants. If

compressed air is used for cleaning of the plant, it must be ensured that the plant is not operating

during the cleaning works. Error messages of individual units must be investigated. Otherwise there

is a danger of overheating or damages.

Project no.

Overview

Item Description

S1

De General project data

10 Bag opener/feeding bin

20 Feeding conveyor rotary screen

30 Rotary screen

40 Rotary screen overflow

50 Sorting conveyor 1

60 Overband magnetic separator 1

65 Separating drum 1

70 Remainder discharge conveyor

80 Fine screen collecting conveyor

90 Fine screen discharge conveyor 1

100 Fine screen discharge conveyor 2

110 Overband magnetic separator 2

115 Separating drum 2

120 Remainder discharge conveyor < 90

130 Screen out collecting conveyor < 300

140 Screen out intermediate conveyor < 300

150 STT feeding conveyor

160 STT 20007102

180 STT fine screen

190 STT flat large

200 Sorting conveyor 2

210 Remainder collecting conveyor general

220 Overband magnetic separator 3

225 Separating drum 3

230 Collecting conveyor rolling

240 Discharge conveyor rolling

250 Overband magnetic separator 4

255 Separating drum 3

260 Discharge conveyor Fe

270 Eddy current separator

280 NIR feed

290 Accelerating belt 1

300 NIR 1

320 Intermediate conveyor NIR 1

330 Sorting conveyor 3

340 Accelerating belt 2

Project no.

350 NIR 2

370 Sorting conveyor 4

380 NIR passage 2

390 Press feeding conveyor 1

400 Press feeding conveyor 2

410 Bundling press

420 Sorting cabin

430 Control

440 Steel construction

450 Engineering, documentation

460 Assembly

470 Transport/lifting equipment

ZB Scope of supply and services

Project no.

Item 10

Bag opener/feeding bin

A bag opener will be supplied for a throughput rate of max 23t/h for a bulk weight of 300kg/m³.

The proportion of bagged waste is max 10%

Project no.

Item 20

Feeding conveyor rotary screen

Specification/material Key data

Waste : 0.30 Net width [mm] : 1500

Tonnage [t/h] : 20.0 Nominal height of side wall [mm] : 600/900

Volume flow [m³/h] : 67 Speed [m/s] : 0.30

Horizontal length [m] : 3.0 Dumping height [mm] (theoretical) :41

Elevation length [m] : 15.0 Total width [mm] (without motor) : 1892

Gooseneck length [m] : 1.25 Total height [mm] : 1120/1480

Weight [kg] : 4945

Colour : 2 K single shift 50mm

Belt data

Belt width [mm] : 1650

Belt type : EP 500/4 4+2

Resistance : Oil and grease

Sealing : Labyrinth seal

Accessories Electrical data

Supports <2m height [number] : 1 Wattage [kW] : 7.5

Supports 2-4m height [number] : 2 Current input [A] : 15.2

Side wall special/adaptor : no Speed [1/min] : 17.0

Press funnel : no Voltage : 400V/50Hz

Bends [number] : 2 Cable operated switches [number]: 1

Return belt cover [m] : 18 ISO F : yes

Belt cover [m] : Brake : yes

Pit cover : yes External fan : yes

Leakage discharge [number] : 1 Frequency converter : no

Thermocouple : no

Chain oiler (left and right) : yes Overspeed monitor : no

Central lubricating point : yes Soft-start : yes

The Chain belt conveyor is constructed as a bolted and welded sectional steel construction. The

drive is realized by means of a double-stranded bushed transporting chain with 125mm spacing and

63mm roller diameter. The rubber belt is bolted on C profiles which are mounted between every 2nd

chain link. In addition, the C profiles run on screwed guide fillets. Angle section drivers are located

on the belt top side in a distance of 1 m. All bolted connections are realized with self-locking nuts.

The guide fillets are made of St 52 and are also bolted.

Project no.

Item 30

Rotary screen

Specification/conveyor belt Key data

Waste : 0.30 Length [mm] : 10000

Material grain size [mm]: 0 – 8000 Width [mm] : 3500

Tonnage [t/h] : 20.0 Height [mm] : 3000

Volume flow [m³/h] : 67 Weight [t] : 15

Drum cylinder Electrical data

Diameter [mm] : 2500 Wattage [kW] : 2 x 11

Length [mm] : 12000 Current input [A] : 2 x 22A

Incline [°] : 4 Speed [1/min] : 9

Voltage : 400V/50Hz

Screen plates

The screen plates may vary over the length of the drum cylinder (different hole patterns).

Geometry Dimension Length on drum cylinder Nozzle length

round 90 6 m none

square 300 6 m 150

round

The rotary screen consists of a rigid steel frame to absorb the run and axial load. The screen is

driven by drive rollers allowing smooth running. The exterior lining has clean-out holes on both sides

over the entire length. All rotary parts are fitted with protective lining. The screen plates are

replaceable.

Accessories

Steel base approx. 10 t with stairs, gangway 1m in width on both sides.

Inlet chute with labyrinth sealing to drum and adoption to feeding conveyor.

Front side access through "drawbridge" and inside lighting.

Outlet chute with adoption to material discharging conveyor oversize.

Chute for undersize material with sealing towards the discharging conveyor.

Central lubrication for the drum bearing.

Project no.

 

Item 40

Rotary drum overflow

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 13.5 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 18 ° Total width [mm] (without motor) : 1568

Total height [mm] : 908

Weight [kg] : 1910

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 3 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number] :

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 50

Sorting conveyor 1

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1200

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 10 Speed at 50Hz[m/s] : 0.9

Centre distance [m] : 27.8 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0 ° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 2919

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Discharge chutes [number] : 16 Speed [1/min] : 39

End discharge chutes [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : yes Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 60

Overband magnetic separator 1

For an ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 65

Separating drum 1

for Fe discharge

with discharge chute

Project no.

Item 70

Remainder discharge conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 13.6 Dumping height [mm] (theoretical) : 6

max. elevation [degree] : 10 ° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 1683

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 3 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 80

Fine screen collecting conveyor

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 8.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 4.7 Dumping height [mm] (theoretical) : 7

max. elevation [degree] : 4° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1056

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 90

Fine screen discharge conveyor 1

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 4.7 Dumping height [mm] (theoretical) :10

max. elevation [degree] : 0° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 762

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4.5 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 100

Fine screen discharge conveyor 2

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.2 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 17.8 Dumping height [mm] (theoretical) : 10

max. elevation [degree] : 6° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1771

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : 1 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 17 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 110

Overband magnetic separator 2

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 115

Separating drum 2

for Fe discharge

Project no.

Item 120

Remainder discharge conveyor < 90

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.2 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 5.4 Dumping height [mm] (theoretical) : 10

max. elevation [degree] : 10° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 816

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : 1 Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 5 Belt tracking switch [number] :

Belt cover [m] : 3 ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 130

Screen collecting conveyor < 300

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 12.3 Dumping height [mm] (theoretical) : 8

max. elevation [degree] : 4° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1793

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 140

Screen intermediate conveyor < 300

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 4.4 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 15° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 883

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 150

STT feeding conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 18.4 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 28° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 2101

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 4.0

Supports 2-4 m height [number] : 2 Current input [A] : 8.5

Feeding hoppers [number] : 1 Speed [1/min] : 74

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 6 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

 

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 160

STT 2000/102

Type

STT 2000/102

Specification/conveyor belt Key data

Waste : 0.30 Length [mm] : 5500

Material grain size [mm] : Width [mm] : 2410

Tonnage [t/h] : 9.0 Height [mm] : 3980

Volume flow [m³/h] : 30 Weight [t] : 8

Paddle

Deck surface 1 (top) : 160 square meter

Deck surface 2 : 45 square meter

Deck surface 3 :

Throughput top deck [m³/h] :

Electrical data

Wattage [kW] : 2 x 4

Current input [A] : 8

Speed [1/min] : 216

Voltage : 400V/50Hz

ISO F

Brake

The through put and/or the density refer to material that is equally and loosely fed over the whole

machine width (max. 200mm dumping height on the feeding conveyor). The throughput also

depends on the grain size distribution (material specific) – in case of doubt a test is required. The

throughput specified here refers to relatively dry recycling material.

To maintain the warranty a ballistic separator should be connected to a motor voltage monitoring

which is included in the separately available control cabinet.

Accessories

Extraction hood : yes Chute rolling (3mm) : yes

Wall adoption : yes Chute rolling (6mm) : no

Chute flat (3mm) : yes Chute fine short for longitudinal discharge : yes

Frequency converter +

current monitor : yes Chute fine large with maintenance door : yes

Project no.

Item 180

STT fine screen

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 0.4 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 1 Speed [m/s] : 0.8

Centre distance [m] : 8.9 Dumping height [mm] (theoretical) : 0

max. elevation [degree] : 0° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1463

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 1 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 190

STT flat large

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 6.7 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1568

Total height [mm] : 908

Weight [kg] : 1250

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 2 Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 200

Sorting conveyor 2

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1200

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 10 Speed [m/s] : 0.9

Centre distance [m] : 15.9 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 1883

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 4 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 10 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 210

Remainder collecting conveyor general

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 35.4 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 3580

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 4.0

Supports 2-4 m height [number] : 3 Current input [A] : 8.5

Feeding hoppers [number] : 3 Speed [1/min] : 74

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 35 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 220

Overband magnetic separator 3

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1.170mm

Length : 1.500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 225

Separating drum 3

for Fe discharge

with discharge chute

Project no.

Item 230

Collecting conveyor rolling

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 5.3 Dumping height [mm] (theoretical) : 6

max. elevation [degree] : 15° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 961

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 1 Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 6 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 240

Discharge conveyor rolling

Specification/material Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 9.4 Dumping height [mm] (theoretical) : 7

max. elevation [degree] : 15° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1124

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 2 Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 250

Overband magnetic separator 4

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 255

Separating drum 3

for Fe discharge

Project no.

Item 260

Fe discharge conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 0.4 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 1 Speed [m/s] : 0.8

Centre distance [m] : 15.5 Dumping height [mm] (theoretical) : 0

max. elevation [degree] : 15° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1594

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 4 Speed [1/min] : 72

Discharge funnels [number] : 2 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 270

Eddy current separator

NE separator

with discharge chute

Project no.

Item 280

NIR feed

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 4.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 15 Speed [m/s] : 1.2

Centre distance [m] : 24.3 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 14° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 2957

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 5.5

Supports 2-4 m height [number] : 4 Current input [A] : 11.3

Feeding hoppers [number] : 4 Speed [1/min] : 108

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Accelerating belt 1

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1450

Tonnage [t/h] : 4.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 15 Speed [m/s] : 2.3

Centre distance [m] : 5.5 Dumping height [mm] (theoretical) : 1

max. elevation [degree] : 0° Total width [mm] (without motor) : 1668

Total height [mm] : 559

Weight [kg] : 1211

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1500

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 190.0

Discharge funnels [number] : Voltage : 400V/50Hz

Return belt cover [m] : Cable operated switches [number]:

Belt cover [m] : Belt tracking switch [number] :

ISO F : yes

Central lubricating point : no External fan : no

Frequency converter : yes

Thermocouple : yes

Overspeed monitor : no

Power separating drum [kW] : 0.18

Current input separating drum [A] : 0.55

Hood

Hood for NIR width 1400

Project no.

The belt discharge slides on the flat conveyor stage surface.

The design of the conveyor is similar to the GG conveyor. The drive drum is not equipped with a

rubber lining in order to avoid mass unbalances and therefore vibrations at higher speeds. The drive

motor is installed in a “sliding” way in order to allow access to the jet bar. The belt sealing towards

the side wall is a sliding lip sealing but with softer seal lips taking the higher belt speed into account.

The discharge hood has a two-part maintenance door on the side and an adjustable baffle plate.

Adjustable mounts for the jet bars and the separating drum are also attached to the painted hood.

The separating drum has a diameter of 135mm (for 2900 belt 220mm) and is driven at 12 1/min.

Side walls, bearing plates and small parts are galvanized.

Project no.

Item 300

NIR 1

Polysort 1400 (TiTech basic)

The TiTech PolySort® system offers free definition of various sorting criteria for material

distinction. The entire system is easy to operate and is equipped with a robust LCD colour display

with a clear structure.

In addition, the display shows all operating state relevant information. All settings and

functions can be defined in an operator friendly way by means of a specifically designed soft

key board. System critical parameters are secured by a customer specific password.

In the default version the system can identify objects from a grain size of 50mm x 50mm.

The following fractions can be selected:

Beverage cartons (German: Flüssigkeitskartons = FKN)

Polyethylene (PE)

Polypropylene (PP)

Polyethylene terephthalate (PET)

Polystyrene (PS)

Expanded polystyrene (EPS)

Polyvinyl chloride (PVC)

Polycarbonate (PC)

Paper/cardboard/paperboard containers/other composites on paper basis (German:

Papier/Pappe/Kartonagen/Sonstige Verbunde auf Papierbasis = PPK/SV)

Aluminium* (AL)

Information on other material types are available on request

Combinations of the above mentioned individual fractions are possible (e.g. GK ~ PPK/SV ~

AL = PGA)

* only in connection with the combination PGA. The PGA setting was developed for

application of the separating system in the lightweight material of air separators for

treatment of the occurring plastics.

Project no.

Available system widths (effective working width):

500, 700, 1000, 1400, 2000 and 2800mm

For available system width see type description

Scope of supply of TiTech PolySort®:

Detection system (scanner) with lights

Operating unit with modem connection

Jet bar with compressed air control unit

related documentation (available in English, German, Spanish, Italian, and French)

electrical and pneumatic cabling for the individual components

Compressed air according to DIN/ISO8573-1, class 3.4.4 with 8-1 0bar, potential noise emission

approx. 85 dB(A), partly up to

93 dB(A).

Colour: default colour RAL 2008/7035, default colour of control cabinet RAL 7035. Formore details

see data sheet warranty payments.

Project no.

Item 320

NIR intermediate conveyor 1

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 750

Tonnage [t/h] : 1.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 2.0 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 559

Weight [kg] : 434

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 2 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 330

Sorting conveyor 3

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 800

Tonnage [t/h] : 1,0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 20 Speed [m/s] : 0.9

Centre distance [m] : 4.3 Dumping height [mm] (theoretical) : 8

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 908

Weight [kg] : 588

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 1 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Pos. 340

Accelerating belt 2

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1050

Tonnage [t/h] : 3.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 12 Speed [m/s] : 2.3

Centre distance [m] : 4.5 Dumping height [mm] (theoretical) : 1

max. elevation [degree] : 0° Total width [mm] (without motor) : 1268

Total height [mm] : 559

Weight [kg] : 819

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1100

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 190.0

Discharge funnels [number] : Voltage : 400V/50Hz

Return belt cover [m] : Cable operated switches [number]:

Belt cover [m] : Belt tracking switch [number] :

ISO F : yes

Central lubricating point : no External fan : no

Frequency converter : yes

Thermocouple : yes

Overspeed monitor : no

Power separating drum [kW] : 0.18

Current input separating drum [A] : 0.55

Hood

Hood for NIR width 1000

Project no.

The belt discharge slides on the flat conveyor stage surface.

The design of the conveyor is similar to the GG conveyor. The drive drum is not equipped with a

rubber lining in order to avoid mass unbalances and therefore vibrations at higher speeds. The drive

motor is installed in a “sliding” way in order to allow access to the jet bar. The belt sealing towards

the side wall is a sliding lip sealing but with softer seal lips taking the higher belt speed into account.

The discharge hood has a two-part maintenance door on the side and an adjustable baffle plate.

Adjustable mounts for the jet bars and the separating drum are also attached to the painted hood.

The separating drum has a diameter of 135mm (for 2900 belt 220mm) and is driven at 12 1/min.

Side walls, bearing plates and small parts are galvanized.

Project no.

Item 350

NIR 2

Polysort 1000 (TiTech basic)

The TiTech PolySort® system offers free definition of various sorting criteria for material

distinction. The entire system is easy to operate and is equipped with a robust LCD colour display

with a clear structure.

In addition, the display shows all operating state relevant information. All settings and

functions can be defined in an operator friendly way by means of a specifically designed soft

key board. System critical parameters are secured by a customer specific password.

In the default version the system can identify objects from a grain size of 50mm x 50mm.

The following fractions can be selected:

Beverage cartons (German: Flüssigkeitskartons = FKN)

Polyethylene (PE)

Polypropylene (PP)

Polyethylene terephthalate (PET)

Polystyrene (PS)

Expanded polystyrene (EPS)

Polyvinyl chloride (PVC)

Polycarbonate (PC)

Paper/cardboard/paperboard containers/other composites on paper basis (German:

Papier/Pappe/Kartonagen/Sonstige Verbunde auf Papierbasis = PPK/SV)

Aluminium* (AL)

Information on other material types are available on request

Combinations of the above mentioned individual fractions are possible (e.g. GK ~ PPK/SV ~

AL = PGA)

* only in connection with the combination PGA. The PGA setting was developed for

application of the separating system in the lightweight material of air separators for

treatment of the occurring plastics.

Project no.

Available system widths (net width):

500, 700, 1000, 1400, 2000, and 2800mm

For available system width see type description

Scope of supply of TiTech PolySort®:

Detection system (scanner) with lights

Operating unit with modem connection

Jet bar with compressed air control unit

related documentation (available in English, German, Spanish, Italian, and French)

electrical and pneumatic cabling for the individual components

Compressed air according to DIN/ISO8573-1, class 3.4.4 with 8-1 0bar, potential noise emission

approx. 85 dB(A), partly up to

93 dB(A).

Colour: default colour RAL 2008/7035, default colour of control cabinet RAL 7035. Formore details

see data sheet warranty payments.

Project no.

Item 370

Sorting conveyor 4

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 800

Tonnage [t/h] : 1.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 20 Speed [m/s] : 0.9

Centre distance [m] : 6.2 Dumping height [mm] (theoretical) :8

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 908

Weight [kg] : 715

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 1 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 380

NIR 2 passage

Specification/Conveyor belt Key data

Waste : 0.20 Net width [mm] : 750

Tonnage [t/h] : 2.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 5.1 Dumping height [mm] (theoretical) : 5

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 559

Weight [kg] : 642

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 5 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 390

Press feeding conveyor 1

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1500

Tonnage [t/h] : 5.0 Nominal height of side wall [mm] : 600/900

Volume flow [m³/h] : 17 Speed [m/s] : 0.30

Horizontal length [m] : 25,4 Dumping height [mm] (theoretical) : 10

Elevation length [m] : 9,0 Total width [mm] (without motor) : 1892

Goose neck length : 1.25 Total height [mm] : 1120/1480

Weight [kg] : 8553

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1650

Type : EP 500/4 4+2

Resistance : Oil and grease

Sealing : Labyrinth seal

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 7.5

Supports 2-4 m height [number] : 1 Current input [A] : 15.2

Side wall special/adaptor : no Speed [1/min] : 17.0

Press funnel : no Voltage : 400V/50Hz

Bends [number] : 2 Cable operated switches [number]: 1

Return belt cover [m] : 11

Belt cover [m] : ISO F : yes

Pit cover : yes Brake : yes

Leakage discharge [number] : 1 External fan : yes

Chain oiler (left+right) : yes Frequency converter : no

Central lubricating point : yes Thermocouple : no

Overspeed monitor : no

Soft start : yes

Project no.

The Chain belt conveyor is constructed as a bolted and welded sectional steel construction. The

drive is realized by means of a double-stranded bushed transporting chain with 125mm spacing and

63mm roller diameter. The rubber belt is bolted on C profiles which are mounted between every 2nd

chain link. In addition, the C profiles run on screwed guide fillets. Angle section drivers are located

on the belt top side in a distance of 1 m. All bolted connections are realized with self-locking nuts.

The guide fillets are made of St 52 and are also bolted.

Project no.

Item 400

Press feeding conveyor 2

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1550

Tonnage [t/h] : 5.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 17 Speed [m/s] : 0.8

Centre distance [m] : 6.4 Dumping height [mm] (theoretical) : 4

max. elevation [degree] : 15° Total width [mm] (without motor) : 1768

Total height [mm] : 908

Weight [kg] : 1385

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1600

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 410

Bundling press

Press (pressing power approx.70 tons) with funnel adaptor

Included in delivery:

Funnel

Control cabinet

Siemens PLC S7 control

with modem and fault display

Bale numbering device, bale length measuring

Operating time meter

Bale slide

Fully automatic application of transportation wire

with automatic wire cut and twist unit

Oil heating oil cooling

Automatic channel adjustment

All required safety devices

Wire large reel system with oil pan (10x)

HARDOX 400 wearing plate on floor

Project no.

Item 420

Sorting cabin

Type

Sorting cabin

Cabin

Cabin length [m] : 25

Cabin width [m] : 9

Cabin height [m : 3

Floor surface [m²] : 225

Wall surface [m²] : 204

Roof surface [m²] : 225

Floor surround [m] : 68

Roof surround [m] : 68

External surround [m] : 12

Opening sorting conveyor [num] : 6

Discharge chutes [num] :

Doors (glass opening) [num] : 6

Doors [num] :

Windows 1 part [num] :

Windows 2 parts [num : 8

Traffic routes

Stairs up to 4m height single flight [number] : 4

Stairs up to 4m height with 1 intermediate landing [number] :

Stairs up to 4m height with 1 intermediate landing[number] :

Stairs up to 4m height with 2 intermediate landing [number] :

Stage

Stage length [m] : 27

Stage width [m] : 9

Stage height [m] : 4

Stage base area [m²] : 243.0

Project no.

Galvanized steel tubular construction with 45mm thick rigid foam panels (with 0.6mm thick

galvanized steel sheet both sides in RAL 9002), planked.

The double tongue and groove with labyrinth effect and integrated sealing integrated in the rigid

foam panels allow a largely air-tight and cold-bridge free construction.

Accessible ceiling construction (structural stability 100kg/panel). Ceiling design like wall design but

with panels of 80mm thickness.

Window frames made of high-impact resistant and weather-resistant PVC. The profile system is

designed with pre-chambers and two continuous compression seals. Corrosion-proof material

reinforcements in the casement and frame profile ensure the required stability of the window.

The windows have double thermopane glazing. Glazing 2 x 4mm float glass with 16mm air gap. The

floor is equipped with am easy-to-clean PVC flooring.

With simple heating/ventilation.

Project no.

Item 430

Control

Control cabinet and planning

Project no.

Item 440

Steel construction

Bag opener

Overband magnetic separator 1

Overband magnetic separator 2

STT 2000-102

Overband magnetic separator 3

Overband magnetic separator 4 with NE

NIR 1 and 2

Extra charge for box walls (10m x 4m x 9 pieces = 360m²) instead of normal base

Access means and gangways

Project no.

Item 440

Engineering, documentation

The company …® will plan the entire plant in close cooperation with the customer. The customer

shall make all necessary documents concerning the provisions available to the contractor. The system

will be planned by the contractor according to the state of the art. All regulations applicable for this

system type will be observed. The required safety devices are included in this bid.

The official requirements which have been communicated to the contractor until submission of the bid

have been integrated in this bid. Any other requirements are not included in the scope of supply.

The contractor will issue a CE conformity declaration (entire system) or a CE manufacturer

declaration (components) for the customer. For the CE conformity declaration the CE

manufacturer declarations of all provisions and any existing plant components must be made

available to the contractor. The contractor cannot issue the conformity declaration until submission

of all manufacturer declarations as specified above. Up to this point the contractor can only submit

the manufacturer declarations for the individual components to the customer.

Planning documents:

Overall structure plan

Erection process plan

Documentation:

The customerwill receive two copies of the documentation in printed formin a folder and one copy in

electronic formon CD.

The documentation will be in German.

Introduction:

After completion of the erection the staff selected by the customer will receive an instruction on the new

technology by our projectmanager and erection supervisor.

During the instruction the staff will be instructed on all danger sports which will be shown on site. The

maintenance and operatingmanuals will be discussed in detail and demonstrated in respect to the

object. Exercises will be performed on individual objects.

The same staff will also be instructed on the control and the visualization. Special emphasis will be placed

on the treatment of failures.

After completion of the instruction all participants must sign an instruction protocol.

Project no.

Item 460

Assembly

Assembly included

Project no.

Item 470

Transport/lifting equipment

All applicable duties, taxes and other charges shall be borne exclusively by the customer.

Project no.

ZB

Scope of supply and services

Scope of supply and services

For complete plants the engineering services comprise the installation plan and the operatingmanual

in two copies and the CE conformity declaration according to annex B.

Delivery does not include:

- Brick and chiselling works, earthworks and/or concrete works, breakthroughs and

- Sealing of the corresponding holes.

- Static calculations and risk analyses.

- Site lighting, electric energy, water supply and disposal.

- Production tools, production material for test run and trial operation.

- Electricity supply to control cabinet.

Services not specified expressly are not part of this bid.

The customer shall be responsible for fire protection and a firewatch shall be provided by the

customer for the required period.

Differences in level of up to 3cm in respect to the base surface will be adjusted by …®.

Additional costs due to larger differences shall be borne by the customer.

Erect and construction permitsmust be ensured for the corresponding sites.

The customer’s sanitary facilities and changing roomsmay be used by the erection staff free of charge.

Transfer of risks, transfer of title, liability

The transfer of riskswill take place on delivery of the components. The components are to be insured

against loss (fire, theft and/or the usual risks). The title will be transferred after complete payment of the

contractual delivery and services. The liability shall be limited to the contract value, with amaximumof 5m

for personal and property damage and 100,000 for financial losses.

Warranty

Thewarrantyperiodwillbe12monthsforallnewplantcomponents,exceptwearparts,subject tointendeduseinnormal

operation,withamaximumoperation,howeverof3500hours. The warranty period will start with the date of the

initial commissioning. However, 6 weeks after delivery at the latest.

Calculation of price : ex works plus applicable VAT

Project no.

Terms of payment

40% advance payment on placement of order

50% before delivery

10% at commissioning, 4 weeks after delivery at the latest provided that insurability at our credit

insurance is guaranteed

Period of payment

strictly net within 14 days after date of invoice

Delivery time 8months

The delivery date is subject to an order confirmation signed by both parties, the completed

commercial and technical clarification, and timely receipt of the part payments.

Binding period

This offer shall be valid for 3 months

Technical changes reserved.Our general terms and conditions shall apply.

 
 

 

 

Semi-Automated Sorting Plant

Throughput up to 20t/h

with sorting stage and sorting cabin

and 2 optical detection devices

Project no.

 

General product data

Input : Domestic waste

Volume : 23t/h

Number of shifts : 1

Working days : 250

Hours/shift : 7

Material data

Domestic waste with a dry-substance content of at least 70%

The proportion of biogenic material is 40% of the input. 90% thereof with < 90mm grain size.

90% of the input is supplied loose.

The delivered goods are not pressed.

The bulk weight is 300kg/m³ (values always for loosely dumped bulk)

Note:

The contractor informs that the materials sorted by the customer may cause overheating. Wastes

frequently contain materials that may cause fires. The plant must be continuously monitored in order

to prevent fire damage. A fire monitoring system should be installed. Further, the plant should be

maintained free of dust and dirt. Especially, dirt must be removed, also outside of the plants. If

compressed air is used for cleaning of the plant, it must be ensured that the plant is not operating

during the cleaning works. Error messages of individual units must be investigated. Otherwise there

is a danger of overheating or damages.

Project no.

Overview

Item Description

S1

De General project data

10 Bag opener/feeding bin

20 Feeding conveyor rotary screen

30 Rotary screen

40 Rotary screen overflow

50 Sorting conveyor 1

60 Overband magnetic separator 1

65 Separating drum 1

70 Remainder discharge conveyor

80 Fine screen collecting conveyor

90 Fine screen discharge conveyor 1

100 Fine screen discharge conveyor 2

110 Overband magnetic separator 2

115 Separating drum 2

120 Remainder discharge conveyor < 90

130 Screen out collecting conveyor < 300

140 Screen out intermediate conveyor < 300

150 STT feeding conveyor

160 STT 20007102

180 STT fine screen

190 STT flat large

200 Sorting conveyor 2

210 Remainder collecting conveyor general

220 Overband magnetic separator 3

225 Separating drum 3

230 Collecting conveyor rolling

240 Discharge conveyor rolling

250 Overband magnetic separator 4

255 Separating drum 3

260 Discharge conveyor Fe

270 Eddy current separator

280 NIR feed

290 Accelerating belt 1

300 NIR 1

320 Intermediate conveyor NIR 1

330 Sorting conveyor 3

340 Accelerating belt 2

Project no.

350 NIR 2

370 Sorting conveyor 4

380 NIR passage 2

390 Press feeding conveyor 1

400 Press feeding conveyor 2

410 Bundling press

420 Sorting cabin

430 Control

440 Steel construction

450 Engineering, documentation

460 Assembly

470 Transport/lifting equipment

ZB Scope of supply and services

Project no.

Item 10

Bag opener/feeding bin

A bag opener will be supplied for a throughput rate of max 23t/h for a bulk weight of 300kg/m³.

The proportion of bagged waste is max 10%

Project no.

Item 20

Feeding conveyor rotary screen

Specification/material Key data

Waste : 0.30 Net width [mm] : 1500

Tonnage [t/h] : 20.0 Nominal height of side wall [mm] : 600/900

Volume flow [m³/h] : 67 Speed [m/s] : 0.30

Horizontal length [m] : 3.0 Dumping height [mm] (theoretical) :41

Elevation length [m] : 15.0 Total width [mm] (without motor) : 1892

Gooseneck length [m] : 1.25 Total height [mm] : 1120/1480

Weight [kg] : 4945

Colour : 2 K single shift 50mm

Belt data

Belt width [mm] : 1650

Belt type : EP 500/4 4+2

Resistance : Oil and grease

Sealing : Labyrinth seal

Accessories Electrical data

Supports <2m height [number] : 1 Wattage [kW] : 7.5

Supports 2-4m height [number] : 2 Current input [A] : 15.2

Side wall special/adaptor : no Speed [1/min] : 17.0

Press funnel : no Voltage : 400V/50Hz

Bends [number] : 2 Cable operated switches [number]: 1

Return belt cover [m] : 18 ISO F : yes

Belt cover [m] : Brake : yes

Pit cover : yes External fan : yes

Leakage discharge [number] : 1 Frequency converter : no

Thermocouple : no

Chain oiler (left and right) : yes Overspeed monitor : no

Central lubricating point : yes Soft-start : yes

The Chain belt conveyor is constructed as a bolted and welded sectional steel construction. The

drive is realized by means of a double-stranded bushed transporting chain with 125mm spacing and

63mm roller diameter. The rubber belt is bolted on C profiles which are mounted between every 2nd

chain link. In addition, the C profiles run on screwed guide fillets. Angle section drivers are located

on the belt top side in a distance of 1 m. All bolted connections are realized with self-locking nuts.

The guide fillets are made of St 52 and are also bolted.

Project no.

Item 30

Rotary screen

Specification/conveyor belt Key data

Waste : 0.30 Length [mm] : 10000

Material grain size [mm]: 0 – 8000 Width [mm] : 3500

Tonnage [t/h] : 20.0 Height [mm] : 3000

Volume flow [m³/h] : 67 Weight [t] : 15

Drum cylinder Electrical data

Diameter [mm] : 2500 Wattage [kW] : 2 x 11

Length [mm] : 12000 Current input [A] : 2 x 22A

Incline [°] : 4 Speed [1/min] : 9

Voltage : 400V/50Hz

Screen plates

The screen plates may vary over the length of the drum cylinder (different hole patterns).

Geometry Dimension Length on drum cylinder Nozzle length

round 90 6 m none

square 300 6 m 150

round

The rotary screen consists of a rigid steel frame to absorb the run and axial load. The screen is

driven by drive rollers allowing smooth running. The exterior lining has clean-out holes on both sides

over the entire length. All rotary parts are fitted with protective lining. The screen plates are

replaceable.

Accessories

Steel base approx. 10 t with stairs, gangway 1m in width on both sides.

Inlet chute with labyrinth sealing to drum and adoption to feeding conveyor.

Front side access through "drawbridge" and inside lighting.

Outlet chute with adoption to material discharging conveyor oversize.

Chute for undersize material with sealing towards the discharging conveyor.

Central lubrication for the drum bearing.

Project no.

 

Item 40

Rotary drum overflow

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 13.5 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 18 ° Total width [mm] (without motor) : 1568

Total height [mm] : 908

Weight [kg] : 1910

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 3 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number] :

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 50

Sorting conveyor 1

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1200

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 10 Speed at 50Hz[m/s] : 0.9

Centre distance [m] : 27.8 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0 ° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 2919

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Discharge chutes [number] : 16 Speed [1/min] : 39

End discharge chutes [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : yes Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 60

Overband magnetic separator 1

For an ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 65

Separating drum 1

for Fe discharge

with discharge chute

Project no.

Item 70

Remainder discharge conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 13.6 Dumping height [mm] (theoretical) : 6

max. elevation [degree] : 10 ° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 1683

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 3 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 80

Fine screen collecting conveyor

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 8.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 4.7 Dumping height [mm] (theoretical) : 7

max. elevation [degree] : 4° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1056

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 90

Fine screen discharge conveyor 1

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 4.7 Dumping height [mm] (theoretical) :10

max. elevation [degree] : 0° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 762

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4.5 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 100

Fine screen discharge conveyor 2

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.2 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 17.8 Dumping height [mm] (theoretical) : 10

max. elevation [degree] : 6° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1771

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : 1 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 17 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 110

Overband magnetic separator 2

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 115

Separating drum 2

for Fe discharge

Project no.

Item 120

Remainder discharge conveyor < 90

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.2 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 5.4 Dumping height [mm] (theoretical) : 10

max. elevation [degree] : 10° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 816

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : 1 Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 5 Belt tracking switch [number] :

Belt cover [m] : 3 ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 130

Screen collecting conveyor < 300

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 12.3 Dumping height [mm] (theoretical) : 8

max. elevation [degree] : 4° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1793

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 140

Screen intermediate conveyor < 300

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 4.4 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 15° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 883

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 150

STT feeding conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 18.4 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 28° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 2101

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 4.0

Supports 2-4 m height [number] : 2 Current input [A] : 8.5

Feeding hoppers [number] : 1 Speed [1/min] : 74

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 6 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

 

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 160

STT 2000/102

Type

STT 2000/102

Specification/conveyor belt Key data

Waste : 0.30 Length [mm] : 5500

Material grain size [mm] : Width [mm] : 2410

Tonnage [t/h] : 9.0 Height [mm] : 3980

Volume flow [m³/h] : 30 Weight [t] : 8

Paddle

Deck surface 1 (top) : 160 square meter

Deck surface 2 : 45 square meter

Deck surface 3 :

Throughput top deck [m³/h] :

Electrical data

Wattage [kW] : 2 x 4

Current input [A] : 8

Speed [1/min] : 216

Voltage : 400V/50Hz

ISO F

Brake

The through put and/or the density refer to material that is equally and loosely fed over the whole

machine width (max. 200mm dumping height on the feeding conveyor). The throughput also

depends on the grain size distribution (material specific) – in case of doubt a test is required. The

throughput specified here refers to relatively dry recycling material.

To maintain the warranty a ballistic separator should be connected to a motor voltage monitoring

which is included in the separately available control cabinet.

Accessories

Extraction hood : yes Chute rolling (3mm) : yes

Wall adoption : yes Chute rolling (6mm) : no

Chute flat (3mm) : yes Chute fine short for longitudinal discharge : yes

Frequency converter +

current monitor : yes Chute fine large with maintenance door : yes

Project no.

Item 180

STT fine screen

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 0.4 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 1 Speed [m/s] : 0.8

Centre distance [m] : 8.9 Dumping height [mm] (theoretical) : 0

max. elevation [degree] : 0° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1463

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 1 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 190

STT flat large

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 6.7 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1568

Total height [mm] : 908

Weight [kg] : 1250

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 2 Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 200

Sorting conveyor 2

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1200

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 10 Speed [m/s] : 0.9

Centre distance [m] : 15.9 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 1883

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 4 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 10 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 210

Remainder collecting conveyor general

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 35.4 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 3580

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 4.0

Supports 2-4 m height [number] : 3 Current input [A] : 8.5

Feeding hoppers [number] : 3 Speed [1/min] : 74

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 35 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 220

Overband magnetic separator 3

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1.170mm

Length : 1.500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 225

Separating drum 3

for Fe discharge

with discharge chute

Project no.

Item 230

Collecting conveyor rolling

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 5.3 Dumping height [mm] (theoretical) : 6

max. elevation [degree] : 15° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 961

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 1 Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 6 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 240

Discharge conveyor rolling

Specification/material Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 9.4 Dumping height [mm] (theoretical) : 7

max. elevation [degree] : 15° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1124

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 2 Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 250

Overband magnetic separator 4

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 255

Separating drum 3

for Fe discharge

Project no.

Item 260

Fe discharge conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 0.4 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 1 Speed [m/s] : 0.8

Centre distance [m] : 15.5 Dumping height [mm] (theoretical) : 0

max. elevation [degree] : 15° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1594

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 4 Speed [1/min] : 72

Discharge funnels [number] : 2 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 270

Eddy current separator

NE separator

with discharge chute

Project no.

Item 280

NIR feed

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 4.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 15 Speed [m/s] : 1.2

Centre distance [m] : 24.3 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 14° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 2957

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 5.5

Supports 2-4 m height [number] : 4 Current input [A] : 11.3

Feeding hoppers [number] : 4 Speed [1/min] : 108

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Accelerating belt 1

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1450

Tonnage [t/h] : 4.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 15 Speed [m/s] : 2.3

Centre distance [m] : 5.5 Dumping height [mm] (theoretical) : 1

max. elevation [degree] : 0° Total width [mm] (without motor) : 1668

Total height [mm] : 559

Weight [kg] : 1211

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1500

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 190.0

Discharge funnels [number] : Voltage : 400V/50Hz

Return belt cover [m] : Cable operated switches [number]:

Belt cover [m] : Belt tracking switch [number] :

ISO F : yes

Central lubricating point : no External fan : no

Frequency converter : yes

Thermocouple : yes

Overspeed monitor : no

Power separating drum [kW] : 0.18

Current input separating drum [A] : 0.55

Hood

Hood for NIR width 1400

Project no.

The belt discharge slides on the flat conveyor stage surface.

The design of the conveyor is similar to the GG conveyor. The drive drum is not equipped with a

rubber lining in order to avoid mass unbalances and therefore vibrations at higher speeds. The drive

motor is installed in a “sliding” way in order to allow access to the jet bar. The belt sealing towards

the side wall is a sliding lip sealing but with softer seal lips taking the higher belt speed into account.

The discharge hood has a two-part maintenance door on the side and an adjustable baffle plate.

Adjustable mounts for the jet bars and the separating drum are also attached to the painted hood.

The separating drum has a diameter of 135mm (for 2900 belt 220mm) and is driven at 12 1/min.

Side walls, bearing plates and small parts are galvanized.

Project no.

Item 300

NIR 1

Polysort 1400 (TiTech basic)

The TiTech PolySort® system offers free definition of various sorting criteria for material

distinction. The entire system is easy to operate and is equipped with a robust LCD colour display

with a clear structure.

In addition, the display shows all operating state relevant information. All settings and

functions can be defined in an operator friendly way by means of a specifically designed soft

key board. System critical parameters are secured by a customer specific password.

In the default version the system can identify objects from a grain size of 50mm x 50mm.

The following fractions can be selected:

Beverage cartons (German: Flüssigkeitskartons = FKN)

Polyethylene (PE)

Polypropylene (PP)

Polyethylene terephthalate (PET)

Polystyrene (PS)

Expanded polystyrene (EPS)

Polyvinyl chloride (PVC)

Polycarbonate (PC)

Paper/cardboard/paperboard containers/other composites on paper basis (German:

Papier/Pappe/Kartonagen/Sonstige Verbunde auf Papierbasis = PPK/SV)

Aluminium* (AL)

Information on other material types are available on request

Combinations of the above mentioned individual fractions are possible (e.g. GK ~ PPK/SV ~

AL = PGA)

* only in connection with the combination PGA. The PGA setting was developed for

application of the separating system in the lightweight material of air separators for

treatment of the occurring plastics.

Project no.

Available system widths (effective working width):

500, 700, 1000, 1400, 2000 and 2800mm

For available system width see type description

Scope of supply of TiTech PolySort®:

Detection system (scanner) with lights

Operating unit with modem connection

Jet bar with compressed air control unit

related documentation (available in English, German, Spanish, Italian, and French)

electrical and pneumatic cabling for the individual components

Compressed air according to DIN/ISO8573-1, class 3.4.4 with 8-1 0bar, potential noise emission

approx. 85 dB(A), partly up to

93 dB(A).

Colour: default colour RAL 2008/7035, default colour of control cabinet RAL 7035. Formore details

see data sheet warranty payments.

Project no.

Item 320

NIR intermediate conveyor 1

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 750

Tonnage [t/h] : 1.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 2.0 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 559

Weight [kg] : 434

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 2 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 330

Sorting conveyor 3

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 800

Tonnage [t/h] : 1,0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 20 Speed [m/s] : 0.9

Centre distance [m] : 4.3 Dumping height [mm] (theoretical) : 8

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 908

Weight [kg] : 588

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 1 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Pos. 340

Accelerating belt 2

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1050

Tonnage [t/h] : 3.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 12 Speed [m/s] : 2.3

Centre distance [m] : 4.5 Dumping height [mm] (theoretical) : 1

max. elevation [degree] : 0° Total width [mm] (without motor) : 1268

Total height [mm] : 559

Weight [kg] : 819

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1100

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 190.0

Discharge funnels [number] : Voltage : 400V/50Hz

Return belt cover [m] : Cable operated switches [number]:

Belt cover [m] : Belt tracking switch [number] :

ISO F : yes

Central lubricating point : no External fan : no

Frequency converter : yes

Thermocouple : yes

Overspeed monitor : no

Power separating drum [kW] : 0.18

Current input separating drum [A] : 0.55

Hood

Hood for NIR width 1000

Project no.

The belt discharge slides on the flat conveyor stage surface.

The design of the conveyor is similar to the GG conveyor. The drive drum is not equipped with a

rubber lining in order to avoid mass unbalances and therefore vibrations at higher speeds. The drive

motor is installed in a “sliding” way in order to allow access to the jet bar. The belt sealing towards

the side wall is a sliding lip sealing but with softer seal lips taking the higher belt speed into account.

The discharge hood has a two-part maintenance door on the side and an adjustable baffle plate.

Adjustable mounts for the jet bars and the separating drum are also attached to the painted hood.

The separating drum has a diameter of 135mm (for 2900 belt 220mm) and is driven at 12 1/min.

Side walls, bearing plates and small parts are galvanized.

Project no.

Item 350

NIR 2

Polysort 1000 (TiTech basic)

The TiTech PolySort® system offers free definition of various sorting criteria for material

distinction. The entire system is easy to operate and is equipped with a robust LCD colour display

with a clear structure.

In addition, the display shows all operating state relevant information. All settings and

functions can be defined in an operator friendly way by means of a specifically designed soft

key board. System critical parameters are secured by a customer specific password.

In the default version the system can identify objects from a grain size of 50mm x 50mm.

The following fractions can be selected:

Beverage cartons (German: Flüssigkeitskartons = FKN)

Polyethylene (PE)

Polypropylene (PP)

Polyethylene terephthalate (PET)

Polystyrene (PS)

Expanded polystyrene (EPS)

Polyvinyl chloride (PVC)

Polycarbonate (PC)

Paper/cardboard/paperboard containers/other composites on paper basis (German:

Papier/Pappe/Kartonagen/Sonstige Verbunde auf Papierbasis = PPK/SV)

Aluminium* (AL)

Information on other material types are available on request

Combinations of the above mentioned individual fractions are possible (e.g. GK ~ PPK/SV ~

AL = PGA)

* only in connection with the combination PGA. The PGA setting was developed for

application of the separating system in the lightweight material of air separators for

treatment of the occurring plastics.

Project no.

Available system widths (net width):

500, 700, 1000, 1400, 2000, and 2800mm

For available system width see type description

Scope of supply of TiTech PolySort®:

Detection system (scanner) with lights

Operating unit with modem connection

Jet bar with compressed air control unit

related documentation (available in English, German, Spanish, Italian, and French)

electrical and pneumatic cabling for the individual components

Compressed air according to DIN/ISO8573-1, class 3.4.4 with 8-1 0bar, potential noise emission

approx. 85 dB(A), partly up to

93 dB(A).

Colour: default colour RAL 2008/7035, default colour of control cabinet RAL 7035. Formore details

see data sheet warranty payments.

Project no.

Item 370

Sorting conveyor 4

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 800

Tonnage [t/h] : 1.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 20 Speed [m/s] : 0.9

Centre distance [m] : 6.2 Dumping height [mm] (theoretical) :8

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 908

Weight [kg] : 715

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 1 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 380

NIR 2 passage

Specification/Conveyor belt Key data

Waste : 0.20 Net width [mm] : 750

Tonnage [t/h] : 2.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 5.1 Dumping height [mm] (theoretical) : 5

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 559

Weight [kg] : 642

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 5 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 390

Press feeding conveyor 1

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1500

Tonnage [t/h] : 5.0 Nominal height of side wall [mm] : 600/900

Volume flow [m³/h] : 17 Speed [m/s] : 0.30

Horizontal length [m] : 25,4 Dumping height [mm] (theoretical) : 10

Elevation length [m] : 9,0 Total width [mm] (without motor) : 1892

Goose neck length : 1.25 Total height [mm] : 1120/1480

Weight [kg] : 8553

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1650

Type : EP 500/4 4+2

Resistance : Oil and grease

Sealing : Labyrinth seal

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 7.5

Supports 2-4 m height [number] : 1 Current input [A] : 15.2

Side wall special/adaptor : no Speed [1/min] : 17.0

Press funnel : no Voltage : 400V/50Hz

Bends [number] : 2 Cable operated switches [number]: 1

Return belt cover [m] : 11

Belt cover [m] : ISO F : yes

Pit cover : yes Brake : yes

Leakage discharge [number] : 1 External fan : yes

Chain oiler (left+right) : yes Frequency converter : no

Central lubricating point : yes Thermocouple : no

Overspeed monitor : no

Soft start : yes

Project no.

The Chain belt conveyor is constructed as a bolted and welded sectional steel construction. The

drive is realized by means of a double-stranded bushed transporting chain with 125mm spacing and

63mm roller diameter. The rubber belt is bolted on C profiles which are mounted between every 2nd

chain link. In addition, the C profiles run on screwed guide fillets. Angle section drivers are located

on the belt top side in a distance of 1 m. All bolted connections are realized with self-locking nuts.

The guide fillets are made of St 52 and are also bolted.

Project no.

Item 400

Press feeding conveyor 2

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1550

Tonnage [t/h] : 5.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 17 Speed [m/s] : 0.8

Centre distance [m] : 6.4 Dumping height [mm] (theoretical) : 4

max. elevation [degree] : 15° Total width [mm] (without motor) : 1768

Total height [mm] : 908

Weight [kg] : 1385

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1600

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 410

Bundling press

Press (pressing power approx.70 tons) with funnel adaptor

Included in delivery:

Funnel

Control cabinet

Siemens PLC S7 control

with modem and fault display

Bale numbering device, bale length measuring

Operating time meter

Bale slide

Fully automatic application of transportation wire

with automatic wire cut and twist unit

Oil heating oil cooling

Automatic channel adjustment

All required safety devices

Wire large reel system with oil pan (10x)

HARDOX 400 wearing plate on floor

Project no.

Item 420

Sorting cabin

Type

Sorting cabin

Cabin

Cabin length [m] : 25

Cabin width [m] : 9

Cabin height [m : 3

Floor surface [m²] : 225

Wall surface [m²] : 204

Roof surface [m²] : 225

Floor surround [m] : 68

Roof surround [m] : 68

External surround [m] : 12

Opening sorting conveyor [num] : 6

Discharge chutes [num] :

Doors (glass opening) [num] : 6

Doors [num] :

Windows 1 part [num] :

Windows 2 parts [num : 8

Traffic routes

Stairs up to 4m height single flight [number] : 4

Stairs up to 4m height with 1 intermediate landing [number] :

Stairs up to 4m height with 1 intermediate landing[number] :

Stairs up to 4m height with 2 intermediate landing [number] :

Stage

Stage length [m] : 27

Stage width [m] : 9

Stage height [m] : 4

Stage base area [m²] : 243.0

Project no.

Galvanized steel tubular construction with 45mm thick rigid foam panels (with 0.6mm thick

galvanized steel sheet both sides in RAL 9002), planked.

The double tongue and groove with labyrinth effect and integrated sealing integrated in the rigid

foam panels allow a largely air-tight and cold-bridge free construction.

Accessible ceiling construction (structural stability 100kg/panel). Ceiling design like wall design but

with panels of 80mm thickness.

Window frames made of high-impact resistant and weather-resistant PVC. The profile system is

designed with pre-chambers and two continuous compression seals. Corrosion-proof material

reinforcements in the casement and frame profile ensure the required stability of the window.

The windows have double thermopane glazing. Glazing 2 x 4mm float glass with 16mm air gap. The

floor is equipped with am easy-to-clean PVC flooring.

With simple heating/ventilation.

Project no.

Item 430

Control

Control cabinet and planning

Project no.

Item 440

Steel construction

Bag opener

Overband magnetic separator 1

Overband magnetic separator 2

STT 2000-102

Overband magnetic separator 3

Overband magnetic separator 4 with NE

NIR 1 and 2

Extra charge for box walls (10m x 4m x 9 pieces = 360m²) instead of normal base

Access means and gangways

Project no.

Item 440

Engineering, documentation

The company …® will plan the entire plant in close cooperation with the customer. The customer

shall make all necessary documents concerning the provisions available to the contractor. The system

will be planned by the contractor according to the state of the art. All regulations applicable for this

system type will be observed. The required safety devices are included in this bid.

The official requirements which have been communicated to the contractor until submission of the bid

have been integrated in this bid. Any other requirements are not included in the scope of supply.

The contractor will issue a CE conformity declaration (entire system) or a CE manufacturer

declaration (components) for the customer. For the CE conformity declaration the CE

manufacturer declarations of all provisions and any existing plant components must be made

available to the contractor. The contractor cannot issue the conformity declaration until submission

of all manufacturer declarations as specified above. Up to this point the contractor can only submit

the manufacturer declarations for the individual components to the customer.

Planning documents:

Overall structure plan

Erection process plan

Documentation:

The customerwill receive two copies of the documentation in printed formin a folder and one copy in

electronic formon CD.

The documentation will be in German.

Introduction:

After completion of the erection the staff selected by the customer will receive an instruction on the new

technology by our projectmanager and erection supervisor.

During the instruction the staff will be instructed on all danger sports which will be shown on site. The

maintenance and operatingmanuals will be discussed in detail and demonstrated in respect to the

object. Exercises will be performed on individual objects.

The same staff will also be instructed on the control and the visualization. Special emphasis will be placed

on the treatment of failures.

After completion of the instruction all participants must sign an instruction protocol.

Project no.

Item 460

Assembly

Assembly included

Project no.

Item 470

Transport/lifting equipment

All applicable duties, taxes and other charges shall be borne exclusively by the customer.

Project no.

ZB

Scope of supply and services

Scope of supply and services

For complete plants the engineering services comprise the installation plan and the operatingmanual

in two copies and the CE conformity declaration according to annex B.

Delivery does not include:

- Brick and chiselling works, earthworks and/or concrete works, breakthroughs and

- Sealing of the corresponding holes.

- Static calculations and risk analyses.

- Site lighting, electric energy, water supply and disposal.

- Production tools, production material for test run and trial operation.

- Electricity supply to control cabinet.

Services not specified expressly are not part of this bid.

The customer shall be responsible for fire protection and a firewatch shall be provided by the

customer for the required period.

Differences in level of up to 3cm in respect to the base surface will be adjusted by …®.

Additional costs due to larger differences shall be borne by the customer.

Erect and construction permitsmust be ensured for the corresponding sites.

The customer’s sanitary facilities and changing roomsmay be used by the erection staff free of charge.

Transfer of risks, transfer of title, liability

The transfer of riskswill take place on delivery of the components. The components are to be insured

against loss (fire, theft and/or the usual risks). The title will be transferred after complete payment of the

contractual delivery and services. The liability shall be limited to the contract value, with amaximumof 5m

for personal and property damage and 100,000 for financial losses.

Warranty

Thewarrantyperiodwillbe12monthsforallnewplantcomponents,exceptwearparts,subject tointendeduseinnormal

operation,withamaximumoperation,howeverof3500hours. The warranty period will start with the date of the

initial commissioning. However, 6 weeks after delivery at the latest.

Calculation of price : ex works plus applicable VAT

Project no.

Terms of payment

40% advance payment on placement of order

50% before delivery

10% at commissioning, 4 weeks after delivery at the latest provided that insurability at our credit

insurance is guaranteed

Period of payment

strictly net within 14 days after date of invoice

Delivery time 8months

The delivery date is subject to an order confirmation signed by both parties, the completed

commercial and technical clarification, and timely receipt of the part payments.

Binding period

This offer shall be valid for 3 months

Technical changes reserved.Our general terms and conditions shall apply.

 
 

 

 

Semi-Automated Sorting Plant

Throughput up to 20t/h

with sorting stage and sorting cabin

and 2 optical detection devices

Project no.

 

General product data

Input : Domestic waste

Volume : 23t/h

Number of shifts : 1

Working days : 250

Hours/shift : 7

Material data

Domestic waste with a dry-substance content of at least 70%

The proportion of biogenic material is 40% of the input. 90% thereof with < 90mm grain size.

90% of the input is supplied loose.

The delivered goods are not pressed.

The bulk weight is 300kg/m³ (values always for loosely dumped bulk)

Note:

The contractor informs that the materials sorted by the customer may cause overheating. Wastes

frequently contain materials that may cause fires. The plant must be continuously monitored in order

to prevent fire damage. A fire monitoring system should be installed. Further, the plant should be

maintained free of dust and dirt. Especially, dirt must be removed, also outside of the plants. If

compressed air is used for cleaning of the plant, it must be ensured that the plant is not operating

during the cleaning works. Error messages of individual units must be investigated. Otherwise there

is a danger of overheating or damages.

Project no.

Overview

Item Description

S1

De General project data

10 Bag opener/feeding bin

20 Feeding conveyor rotary screen

30 Rotary screen

40 Rotary screen overflow

50 Sorting conveyor 1

60 Overband magnetic separator 1

65 Separating drum 1

70 Remainder discharge conveyor

80 Fine screen collecting conveyor

90 Fine screen discharge conveyor 1

100 Fine screen discharge conveyor 2

110 Overband magnetic separator 2

115 Separating drum 2

120 Remainder discharge conveyor < 90

130 Screen out collecting conveyor < 300

140 Screen out intermediate conveyor < 300

150 STT feeding conveyor

160 STT 20007102

180 STT fine screen

190 STT flat large

200 Sorting conveyor 2

210 Remainder collecting conveyor general

220 Overband magnetic separator 3

225 Separating drum 3

230 Collecting conveyor rolling

240 Discharge conveyor rolling

250 Overband magnetic separator 4

255 Separating drum 3

260 Discharge conveyor Fe

270 Eddy current separator

280 NIR feed

290 Accelerating belt 1

300 NIR 1

320 Intermediate conveyor NIR 1

330 Sorting conveyor 3

340 Accelerating belt 2

Project no.

350 NIR 2

370 Sorting conveyor 4

380 NIR passage 2

390 Press feeding conveyor 1

400 Press feeding conveyor 2

410 Bundling press

420 Sorting cabin

430 Control

440 Steel construction

450 Engineering, documentation

460 Assembly

470 Transport/lifting equipment

ZB Scope of supply and services

Project no.

Item 10

Bag opener/feeding bin

A bag opener will be supplied for a throughput rate of max 23t/h for a bulk weight of 300kg/m³.

The proportion of bagged waste is max 10%

Project no.

Item 20

Feeding conveyor rotary screen

Specification/material Key data

Waste : 0.30 Net width [mm] : 1500

Tonnage [t/h] : 20.0 Nominal height of side wall [mm] : 600/900

Volume flow [m³/h] : 67 Speed [m/s] : 0.30

Horizontal length [m] : 3.0 Dumping height [mm] (theoretical) :41

Elevation length [m] : 15.0 Total width [mm] (without motor) : 1892

Gooseneck length [m] : 1.25 Total height [mm] : 1120/1480

Weight [kg] : 4945

Colour : 2 K single shift 50mm

Belt data

Belt width [mm] : 1650

Belt type : EP 500/4 4+2

Resistance : Oil and grease

Sealing : Labyrinth seal

Accessories Electrical data

Supports <2m height [number] : 1 Wattage [kW] : 7.5

Supports 2-4m height [number] : 2 Current input [A] : 15.2

Side wall special/adaptor : no Speed [1/min] : 17.0

Press funnel : no Voltage : 400V/50Hz

Bends [number] : 2 Cable operated switches [number]: 1

Return belt cover [m] : 18 ISO F : yes

Belt cover [m] : Brake : yes

Pit cover : yes External fan : yes

Leakage discharge [number] : 1 Frequency converter : no

Thermocouple : no

Chain oiler (left and right) : yes Overspeed monitor : no

Central lubricating point : yes Soft-start : yes

The Chain belt conveyor is constructed as a bolted and welded sectional steel construction. The

drive is realized by means of a double-stranded bushed transporting chain with 125mm spacing and

63mm roller diameter. The rubber belt is bolted on C profiles which are mounted between every 2nd

chain link. In addition, the C profiles run on screwed guide fillets. Angle section drivers are located

on the belt top side in a distance of 1 m. All bolted connections are realized with self-locking nuts.

The guide fillets are made of St 52 and are also bolted.

Project no.

Item 30

Rotary screen

Specification/conveyor belt Key data

Waste : 0.30 Length [mm] : 10000

Material grain size [mm]: 0 – 8000 Width [mm] : 3500

Tonnage [t/h] : 20.0 Height [mm] : 3000

Volume flow [m³/h] : 67 Weight [t] : 15

Drum cylinder Electrical data

Diameter [mm] : 2500 Wattage [kW] : 2 x 11

Length [mm] : 12000 Current input [A] : 2 x 22A

Incline [°] : 4 Speed [1/min] : 9

Voltage : 400V/50Hz

Screen plates

The screen plates may vary over the length of the drum cylinder (different hole patterns).

Geometry Dimension Length on drum cylinder Nozzle length

round 90 6 m none

square 300 6 m 150

round

The rotary screen consists of a rigid steel frame to absorb the run and axial load. The screen is

driven by drive rollers allowing smooth running. The exterior lining has clean-out holes on both sides

over the entire length. All rotary parts are fitted with protective lining. The screen plates are

replaceable.

Accessories

Steel base approx. 10 t with stairs, gangway 1m in width on both sides.

Inlet chute with labyrinth sealing to drum and adoption to feeding conveyor.

Front side access through "drawbridge" and inside lighting.

Outlet chute with adoption to material discharging conveyor oversize.

Chute for undersize material with sealing towards the discharging conveyor.

Central lubrication for the drum bearing.

Project no.

 

Item 40

Rotary drum overflow

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 13.5 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 18 ° Total width [mm] (without motor) : 1568

Total height [mm] : 908

Weight [kg] : 1910

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 3 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number] :

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 50

Sorting conveyor 1

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1200

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 10 Speed at 50Hz[m/s] : 0.9

Centre distance [m] : 27.8 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0 ° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 2919

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Discharge chutes [number] : 16 Speed [1/min] : 39

End discharge chutes [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : yes Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 60

Overband magnetic separator 1

For an ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 65

Separating drum 1

for Fe discharge

with discharge chute

Project no.

Item 70

Remainder discharge conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 13.6 Dumping height [mm] (theoretical) : 6

max. elevation [degree] : 10 ° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 1683

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 3 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 80

Fine screen collecting conveyor

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 8.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 4.7 Dumping height [mm] (theoretical) : 7

max. elevation [degree] : 4° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1056

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 90

Fine screen discharge conveyor 1

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 4.7 Dumping height [mm] (theoretical) :10

max. elevation [degree] : 0° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 762

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4.5 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 100

Fine screen discharge conveyor 2

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.2 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 17.8 Dumping height [mm] (theoretical) : 10

max. elevation [degree] : 6° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1771

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : 1 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 17 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 110

Overband magnetic separator 2

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 115

Separating drum 2

for Fe discharge

Project no.

Item 120

Remainder discharge conveyor < 90

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 8.2 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 27 Speed [m/s] : 0.8

Centre distance [m] : 5.4 Dumping height [mm] (theoretical) : 10

max. elevation [degree] : 10° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 816

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : 1 Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 5 Belt tracking switch [number] :

Belt cover [m] : 3 ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 130

Screen collecting conveyor < 300

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 12.3 Dumping height [mm] (theoretical) : 8

max. elevation [degree] : 4° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1793

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 140

Screen intermediate conveyor < 300

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 4.4 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 15° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 883

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 4 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 150

STT feeding conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 9.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 30 Speed [m/s] : 0.8

Centre distance [m] : 18.4 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 28° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 2101

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 4.0

Supports 2-4 m height [number] : 2 Current input [A] : 8.5

Feeding hoppers [number] : 1 Speed [1/min] : 74

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 6 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

 

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 160

STT 2000/102

Type

STT 2000/102

Specification/conveyor belt Key data

Waste : 0.30 Length [mm] : 5500

Material grain size [mm] : Width [mm] : 2410

Tonnage [t/h] : 9.0 Height [mm] : 3980

Volume flow [m³/h] : 30 Weight [t] : 8

Paddle

Deck surface 1 (top) : 160 square meter

Deck surface 2 : 45 square meter

Deck surface 3 :

Throughput top deck [m³/h] :

Electrical data

Wattage [kW] : 2 x 4

Current input [A] : 8

Speed [1/min] : 216

Voltage : 400V/50Hz

ISO F

Brake

The through put and/or the density refer to material that is equally and loosely fed over the whole

machine width (max. 200mm dumping height on the feeding conveyor). The throughput also

depends on the grain size distribution (material specific) – in case of doubt a test is required. The

throughput specified here refers to relatively dry recycling material.

To maintain the warranty a ballistic separator should be connected to a motor voltage monitoring

which is included in the separately available control cabinet.

Accessories

Extraction hood : yes Chute rolling (3mm) : yes

Wall adoption : yes Chute rolling (6mm) : no

Chute flat (3mm) : yes Chute fine short for longitudinal discharge : yes

Frequency converter +

current monitor : yes Chute fine large with maintenance door : yes

Project no.

Item 180

STT fine screen

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 0.4 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 1 Speed [m/s] : 0.8

Centre distance [m] : 8.9 Dumping height [mm] (theoretical) : 0

max. elevation [degree] : 0° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 1463

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 1 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 190

STT flat large

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 6.7 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1568

Total height [mm] : 908

Weight [kg] : 1250

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 2 Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 200

Sorting conveyor 2

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1200

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 10 Speed [m/s] : 0.9

Centre distance [m] : 15.9 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 1883

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 4 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 10 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 210

Remainder collecting conveyor general

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 3.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 35.4 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 0° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 3580

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 4.0

Supports 2-4 m height [number] : 3 Current input [A] : 8.5

Feeding hoppers [number] : 3 Speed [1/min] : 74

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 35 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 220

Overband magnetic separator 3

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1.170mm

Length : 1.500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 225

Separating drum 3

for Fe discharge

with discharge chute

Project no.

Item 230

Collecting conveyor rolling

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1150

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 5.3 Dumping height [mm] (theoretical) : 6

max. elevation [degree] : 15° Total width [mm] (without motor) : 1368

Total height [mm] : 908

Weight [kg] : 961

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1200

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 1 Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 6 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 240

Discharge conveyor rolling

Specification/material Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 6.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 9.4 Dumping height [mm] (theoretical) : 7

max. elevation [degree] : 15° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1124

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 2.2

Supports 2-4 m height [number] : 2 Current input [A] : 5.0

Feeding hoppers [number] : 1 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : yes Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 250

Overband magnetic separator 4

for ambient temperature of max. 45 degree Celsius

shielded magnet in permanent design

Dimensions

Width : 1,170mm

Length : 1,500mm

Height : 250mm

Non-magnetic frame structure

Protection against iron deposits

Openings between magnetic body and frame are sealed.

Drive

Drive power: 3.0kW

Supply voltage: 230/400V three-phase alternating current 50Hz, switched to 400V

Discharge feeder

Width : 1,200mm

Belt speed : 1.5m/s

Including scraper plate and safety devices

Machine RAL 6018 safety devices RAL 2000

Project no.

Item 255

Separating drum 3

for Fe discharge

Project no.

Item 260

Fe discharge conveyor

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 950

Tonnage [t/h] : 0.4 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 1 Speed [m/s] : 0.8

Centre distance [m] : 15.5 Dumping height [mm] (theoretical) : 0

max. elevation [degree] : 15° Total width [mm] (without motor) : 1168

Total height [mm] : 559

Weight [kg] : 1594

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1000

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 4 Speed [1/min] : 72

Discharge funnels [number] : 2 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 270

Eddy current separator

NE separator

with discharge chute

Project no.

Item 280

NIR feed

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1350

Tonnage [t/h] : 4.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 15 Speed [m/s] : 1.2

Centre distance [m] : 24.3 Dumping height [mm] (theoretical) : 3

max. elevation [degree] : 14° Total width [mm] (without motor) : 1568

Total height [mm] : 559

Weight [kg] : 2957

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1400

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 20

Driver distance [mm] : 950

Site belt connection : yes

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 5.5

Supports 2-4 m height [number] : 4 Current input [A] : 11.3

Feeding hoppers [number] : 4 Speed [1/min] : 108

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : yes Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Accelerating belt 1

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1450

Tonnage [t/h] : 4.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 15 Speed [m/s] : 2.3

Centre distance [m] : 5.5 Dumping height [mm] (theoretical) : 1

max. elevation [degree] : 0° Total width [mm] (without motor) : 1668

Total height [mm] : 559

Weight [kg] : 1211

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1500

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 190.0

Discharge funnels [number] : Voltage : 400V/50Hz

Return belt cover [m] : Cable operated switches [number]:

Belt cover [m] : Belt tracking switch [number] :

ISO F : yes

Central lubricating point : no External fan : no

Frequency converter : yes

Thermocouple : yes

Overspeed monitor : no

Power separating drum [kW] : 0.18

Current input separating drum [A] : 0.55

Hood

Hood for NIR width 1400

Project no.

The belt discharge slides on the flat conveyor stage surface.

The design of the conveyor is similar to the GG conveyor. The drive drum is not equipped with a

rubber lining in order to avoid mass unbalances and therefore vibrations at higher speeds. The drive

motor is installed in a “sliding” way in order to allow access to the jet bar. The belt sealing towards

the side wall is a sliding lip sealing but with softer seal lips taking the higher belt speed into account.

The discharge hood has a two-part maintenance door on the side and an adjustable baffle plate.

Adjustable mounts for the jet bars and the separating drum are also attached to the painted hood.

The separating drum has a diameter of 135mm (for 2900 belt 220mm) and is driven at 12 1/min.

Side walls, bearing plates and small parts are galvanized.

Project no.

Item 300

NIR 1

Polysort 1400 (TiTech basic)

The TiTech PolySort® system offers free definition of various sorting criteria for material

distinction. The entire system is easy to operate and is equipped with a robust LCD colour display

with a clear structure.

In addition, the display shows all operating state relevant information. All settings and

functions can be defined in an operator friendly way by means of a specifically designed soft

key board. System critical parameters are secured by a customer specific password.

In the default version the system can identify objects from a grain size of 50mm x 50mm.

The following fractions can be selected:

Beverage cartons (German: Flüssigkeitskartons = FKN)

Polyethylene (PE)

Polypropylene (PP)

Polyethylene terephthalate (PET)

Polystyrene (PS)

Expanded polystyrene (EPS)

Polyvinyl chloride (PVC)

Polycarbonate (PC)

Paper/cardboard/paperboard containers/other composites on paper basis (German:

Papier/Pappe/Kartonagen/Sonstige Verbunde auf Papierbasis = PPK/SV)

Aluminium* (AL)

Information on other material types are available on request

Combinations of the above mentioned individual fractions are possible (e.g. GK ~ PPK/SV ~

AL = PGA)

* only in connection with the combination PGA. The PGA setting was developed for

application of the separating system in the lightweight material of air separators for

treatment of the occurring plastics.

Project no.

Available system widths (effective working width):

500, 700, 1000, 1400, 2000 and 2800mm

For available system width see type description

Scope of supply of TiTech PolySort®:

Detection system (scanner) with lights

Operating unit with modem connection

Jet bar with compressed air control unit

related documentation (available in English, German, Spanish, Italian, and French)

electrical and pneumatic cabling for the individual components

Compressed air according to DIN/ISO8573-1, class 3.4.4 with 8-1 0bar, potential noise emission

approx. 85 dB(A), partly up to

93 dB(A).

Colour: default colour RAL 2008/7035, default colour of control cabinet RAL 7035. Formore details

see data sheet warranty payments.

Project no.

Item 320

NIR intermediate conveyor 1

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 750

Tonnage [t/h] : 1.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 20 Speed [m/s] : 0.8

Centre distance [m] : 2.0 Dumping height [mm] (theoretical) : 9

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 559

Weight [kg] : 434

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 2 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 330

Sorting conveyor 3

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 800

Tonnage [t/h] : 1,0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 20 Speed [m/s] : 0.9

Centre distance [m] : 4.3 Dumping height [mm] (theoretical) : 8

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 908

Weight [kg] : 588

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 1 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Pos. 340

Accelerating belt 2

Specification/Conveyor belt Key data

Waste : 0.30 Net width [mm] : 1050

Tonnage [t/h] : 3.6 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 12 Speed [m/s] : 2.3

Centre distance [m] : 4.5 Dumping height [mm] (theoretical) : 1

max. elevation [degree] : 0° Total width [mm] (without motor) : 1268

Total height [mm] : 559

Weight [kg] : 819

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1100

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 1 Speed [1/min] : 190.0

Discharge funnels [number] : Voltage : 400V/50Hz

Return belt cover [m] : Cable operated switches [number]:

Belt cover [m] : Belt tracking switch [number] :

ISO F : yes

Central lubricating point : no External fan : no

Frequency converter : yes

Thermocouple : yes

Overspeed monitor : no

Power separating drum [kW] : 0.18

Current input separating drum [A] : 0.55

Hood

Hood for NIR width 1000

Project no.

The belt discharge slides on the flat conveyor stage surface.

The design of the conveyor is similar to the GG conveyor. The drive drum is not equipped with a

rubber lining in order to avoid mass unbalances and therefore vibrations at higher speeds. The drive

motor is installed in a “sliding” way in order to allow access to the jet bar. The belt sealing towards

the side wall is a sliding lip sealing but with softer seal lips taking the higher belt speed into account.

The discharge hood has a two-part maintenance door on the side and an adjustable baffle plate.

Adjustable mounts for the jet bars and the separating drum are also attached to the painted hood.

The separating drum has a diameter of 135mm (for 2900 belt 220mm) and is driven at 12 1/min.

Side walls, bearing plates and small parts are galvanized.

Project no.

Item 350

NIR 2

Polysort 1000 (TiTech basic)

The TiTech PolySort® system offers free definition of various sorting criteria for material

distinction. The entire system is easy to operate and is equipped with a robust LCD colour display

with a clear structure.

In addition, the display shows all operating state relevant information. All settings and

functions can be defined in an operator friendly way by means of a specifically designed soft

key board. System critical parameters are secured by a customer specific password.

In the default version the system can identify objects from a grain size of 50mm x 50mm.

The following fractions can be selected:

Beverage cartons (German: Flüssigkeitskartons = FKN)

Polyethylene (PE)

Polypropylene (PP)

Polyethylene terephthalate (PET)

Polystyrene (PS)

Expanded polystyrene (EPS)

Polyvinyl chloride (PVC)

Polycarbonate (PC)

Paper/cardboard/paperboard containers/other composites on paper basis (German:

Papier/Pappe/Kartonagen/Sonstige Verbunde auf Papierbasis = PPK/SV)

Aluminium* (AL)

Information on other material types are available on request

Combinations of the above mentioned individual fractions are possible (e.g. GK ~ PPK/SV ~

AL = PGA)

* only in connection with the combination PGA. The PGA setting was developed for

application of the separating system in the lightweight material of air separators for

treatment of the occurring plastics.

Project no.

Available system widths (net width):

500, 700, 1000, 1400, 2000, and 2800mm

For available system width see type description

Scope of supply of TiTech PolySort®:

Detection system (scanner) with lights

Operating unit with modem connection

Jet bar with compressed air control unit

related documentation (available in English, German, Spanish, Italian, and French)

electrical and pneumatic cabling for the individual components

Compressed air according to DIN/ISO8573-1, class 3.4.4 with 8-1 0bar, potential noise emission

approx. 85 dB(A), partly up to

93 dB(A).

Colour: default colour RAL 2008/7035, default colour of control cabinet RAL 7035. Formore details

see data sheet warranty payments.

Project no.

Item 370

Sorting conveyor 4

Specification/conveyor belt Key data

Waste : 0.05 Net width [mm] : 800

Tonnage [t/h] : 1.0 Nominal height of side wall [mm] : 0

Volume flow [m³/h] : 20 Speed [m/s] : 0.9

Centre distance [m] : 6.2 Dumping height [mm] (theoretical) :8

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 908

Weight [kg] : 715

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : open

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 2 Wattage [kW] : 3.0

Supports 2-4 m height [number] : Current input [A] : 6.3

Feeding hoppers [number] : 1 Speed [1/min] : 39

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]: 2

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : yes

Brake : no

Antimag. connecting piece : no External fan : yes

Antimag. head piece : no Frequency converter : yes

Roll rubber lining : yes Thermocouple : yes

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the slightly trough-shaped conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 320mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. The drive

drum is equipped with a rubber lining. The bearing has 60mm brand flanged bearings and is well

dimensioned. Cleaning of the interior belt is effected by a plow-type scraper. For flat belts a scraper

is mounted at the discharge end. Bearing plates and small parts are galvanized. The lean-on

protection is made of easy to clean PE (white strips with black filling).

Project no.

Item 380

NIR 2 passage

Specification/Conveyor belt Key data

Waste : 0.20 Net width [mm] : 750

Tonnage [t/h] : 2.0 Nominal height of side wall [mm] : 200

Volume flow [m³/h] : 10 Speed [m/s] : 0.8

Centre distance [m] : 5.1 Dumping height [mm] (theoretical) : 5

max. elevation [degree] : 0° Total width [mm] (without motor) : 968

Total height [mm] : 559

Weight [kg] : 642

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 800

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] :

Driver distance [mm] :

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 2.2

Supports 2-4 m height [number] : Current input [A] : 5.0

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : 1 Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : 5 Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 390

Press feeding conveyor 1

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1500

Tonnage [t/h] : 5.0 Nominal height of side wall [mm] : 600/900

Volume flow [m³/h] : 17 Speed [m/s] : 0.30

Horizontal length [m] : 25,4 Dumping height [mm] (theoretical) : 10

Elevation length [m] : 9,0 Total width [mm] (without motor) : 1892

Goose neck length : 1.25 Total height [mm] : 1120/1480

Weight [kg] : 8553

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1650

Type : EP 500/4 4+2

Resistance : Oil and grease

Sealing : Labyrinth seal

Accessories Electrical data

Supports <2 m height [number] : 1 Wattage [kW] : 7.5

Supports 2-4 m height [number] : 1 Current input [A] : 15.2

Side wall special/adaptor : no Speed [1/min] : 17.0

Press funnel : no Voltage : 400V/50Hz

Bends [number] : 2 Cable operated switches [number]: 1

Return belt cover [m] : 11

Belt cover [m] : ISO F : yes

Pit cover : yes Brake : yes

Leakage discharge [number] : 1 External fan : yes

Chain oiler (left+right) : yes Frequency converter : no

Central lubricating point : yes Thermocouple : no

Overspeed monitor : no

Soft start : yes

Project no.

The Chain belt conveyor is constructed as a bolted and welded sectional steel construction. The

drive is realized by means of a double-stranded bushed transporting chain with 125mm spacing and

63mm roller diameter. The rubber belt is bolted on C profiles which are mounted between every 2nd

chain link. In addition, the C profiles run on screwed guide fillets. Angle section drivers are located

on the belt top side in a distance of 1 m. All bolted connections are realized with self-locking nuts.

The guide fillets are made of St 52 and are also bolted.

Project no.

Item 400

Press feeding conveyor 2

Specification/conveyor belt Key data

Waste : 0.30 Net width [mm] : 1550

Tonnage [t/h] : 5.0 Nominal height of side wall [mm] : 500

Volume flow [m³/h] : 17 Speed [m/s] : 0.8

Centre distance [m] : 6.4 Dumping height [mm] (theoretical) : 4

max. elevation [degree] : 15° Total width [mm] (without motor) : 1768

Total height [mm] : 908

Weight [kg] : 1385

Colour : 2K single shift 0.05mm

Belt data

Belt width [mm] : 1600

Type : EP 400/3 2+0

Resistance : Oil and grease

Sealing : Lip sealing

Height of driver [mm] : 30

Driver distance [mm] : 950

Site belt connection : no

Accessories Electrical data

Supports <2 m height [number] : Wattage [kW] : 3.0

Supports 2-4 m height [number] : 2 Current input [A] : 6.6

Feeding hoppers [number] : 2 Speed [1/min] : 72

Discharge funnels [number] : Voltage : 400V/50Hz

Bends [number] : Cable operated switches [number]:

Return belt cover [m] : Belt tracking switch [number] :

Belt cover [m] : ISO F : no

Brake : no

Antimag. connecting piece : no External fan : no

Antimag. head piece : no Frequency converter : no

Roll rubber lining : no Thermocouple : no

Central lubricating point : no Overspeed monitor : no

Reversing : no

Crash protection [m] : Soft-start : no

Project no.

The belt discharge slides on the flat conveyor stage surface.

The belt structure consists of a rigid tubular construction.

The belt is driven by means of a SEW bevel gear motor. The drive and return drums have a

diameter of 220mm and a barrel-shape design in order to ensure an ideal belt run. The removal of

the drive and return drums is made through the conveyor frame in direction of the axis. From a

centre distance of 10m on the drive drum is equipped with a rubber lining. The bearing has 60mm

brand flanged bearings and is well dimensioned. Cleaning of the interior belt is effected by a plowtype

scraper. For flat belts a scraper is mounted at the discharge end. For the belt sealing towards

the side wall it can be chosen between a sliding lip sealing or a contact-less labyrinth sealing. Side

walls, bearing plates and small parts are galvanized.

Project no.

Item 410

Bundling press

Press (pressing power approx.70 tons) with funnel adaptor

Included in delivery:

Funnel

Control cabinet

Siemens PLC S7 control

with modem and fault display

Bale numbering device, bale length measuring

Operating time meter

Bale slide

Fully automatic application of transportation wire

with automatic wire cut and twist unit

Oil heating oil cooling

Automatic channel adjustment

All required safety devices

Wire large reel system with oil pan (10x)

HARDOX 400 wearing plate on floor

Project no.

Item 420

Sorting cabin

Type

Sorting cabin

Cabin

Cabin length [m] : 25

Cabin width [m] : 9

Cabin height [m : 3

Floor surface [m²] : 225

Wall surface [m²] : 204

Roof surface [m²] : 225

Floor surround [m] : 68

Roof surround [m] : 68

External surround [m] : 12

Opening sorting conveyor [num] : 6

Discharge chutes [num] :

Doors (glass opening) [num] : 6

Doors [num] :

Windows 1 part [num] :

Windows 2 parts [num : 8

Traffic routes

Stairs up to 4m height single flight [number] : 4

Stairs up to 4m height with 1 intermediate landing [number] :

Stairs up to 4m height with 1 intermediate landing[number] :

Stairs up to 4m height with 2 intermediate landing [number] :

Stage

Stage length [m] : 27

Stage width [m] : 9

Stage height [m] : 4

Stage base area [m²] : 243.0

Project no.

Galvanized steel tubular construction with 45mm thick rigid foam panels (with 0.6mm thick

galvanized steel sheet both sides in RAL 9002), planked.

The double tongue and groove with labyrinth effect and integrated sealing integrated in the rigid

foam panels allow a largely air-tight and cold-bridge free construction.

Accessible ceiling construction (structural stability 100kg/panel). Ceiling design like wall design but

with panels of 80mm thickness.

Window frames made of high-impact resistant and weather-resistant PVC. The profile system is

designed with pre-chambers and two continuous compression seals. Corrosion-proof material

reinforcements in the casement and frame profile ensure the required stability of the window.

The windows have double thermopane glazing. Glazing 2 x 4mm float glass with 16mm air gap. The

floor is equipped with am easy-to-clean PVC flooring.

With simple heating/ventilation.

Project no.

Item 430

Control

Control cabinet and planning

Project no.

Item 440

Steel construction

Bag opener

Overband magnetic separator 1

Overband magnetic separator 2

STT 2000-102

Overband magnetic separator 3

Overband magnetic separator 4 with NE

NIR 1 and 2

Extra charge for box walls (10m x 4m x 9 pieces = 360m²) instead of normal base

Access means and gangways

Project no.

Item 440

Engineering, documentation

The company …® will plan the entire plant in close cooperation with the customer. The customer

shall make all necessary documents concerning the provisions available to the contractor. The system

will be planned by the contractor according to the state of the art. All regulations applicable for this

system type will be observed. The required safety devices are included in this bid.

The official requirements which have been communicated to the contractor until submission of the bid

have been integrated in this bid. Any other requirements are not included in the scope of supply.

The contractor will issue a CE conformity declaration (entire system) or a CE manufacturer

declaration (components) for the customer. For the CE conformity declaration the CE

manufacturer declarations of all provisions and any existing plant components must be made

available to the contractor. The contractor cannot issue the conformity declaration until submission

of all manufacturer declarations as specified above. Up to this point the contractor can only submit

the manufacturer declarations for the individual components to the customer.

Planning documents:

Overall structure plan

Erection process plan

Documentation:

The customerwill receive two copies of the documentation in printed formin a folder and one copy in

electronic formon CD.

The documentation will be in German.

Introduction:

After completion of the erection the staff selected by the customer will receive an instruction on the new

technology by our projectmanager and erection supervisor.

During the instruction the staff will be instructed on all danger sports which will be shown on site. The

maintenance and operatingmanuals will be discussed in detail and demonstrated in respect to the

object. Exercises will be performed on individual objects.

The same staff will also be instructed on the control and the visualization. Special emphasis will be placed

on the treatment of failures.

After completion of the instruction all participants must sign an instruction protocol.

Project no.

Item 460

Assembly

Assembly included

Project no.

Item 470

Transport/lifting equipment

All applicable duties, taxes and other charges shall be borne exclusively by the customer.

Project no.

ZB

Scope of supply and services

Scope of supply and services

For complete plants the engineering services comprise the installation plan and the operatingmanual

in two copies and the CE conformity declaration according to annex B.

Delivery does not include:

- Brick and chiselling works, earthworks and/or concrete works, breakthroughs and

- Sealing of the corresponding holes.

- Static calculations and risk analyses.

- Site lighting, electric energy, water supply and disposal.

- Production tools, production material for test run and trial operation.

- Electricity supply to control cabinet.

Services not specified expressly are not part of this bid.

The customer shall be responsible for fire protection and a firewatch shall be provided by the

customer for the required period.

Differences in level of up to 3cm in respect to the base surface will be adjusted by …®.

Additional costs due to larger differences shall be borne by the customer.

Erect and construction permitsmust be ensured for the corresponding sites.

The customer’s sanitary facilities and changing roomsmay be used by the erection staff free of charge.

Transfer of risks, transfer of title, liability

The transfer of riskswill take place on delivery of the components. The components are to be insured

against loss (fire, theft and/or the usual risks). The title will be transferred after complete payment of the

contractual delivery and services. The liability shall be limited to the contract value, with amaximumof 5m

for personal and property damage and 100,000 for financial losses.

Warranty

Thewarrantyperiodwillbe12monthsforallnewplantcomponents,exceptwearparts,subject tointendeduseinnormal

operation,withamaximumoperation,howeverof3500hours. The warranty period will start with the date of the

initial commissioning. However, 6 weeks after delivery at the latest.

Calculation of price : ex works plus applicable VAT

Project no.

Terms of payment

40% advance payment on placement of order

50% before delivery

10% at commissioning, 4 weeks after delivery at the latest provided that insurability at our credit

insurance is guaranteed

Period of payment

strictly net within 14 days after date of invoice

Delivery time 8months

The delivery date is subject to an order confirmation signed by both parties, the completed

commercial and technical clarification, and timely receipt of the part payments.

Binding period

This offer shall be valid for 3 months

Technical changes reserved.Our general terms and conditions shall apply.

 
 
  Heute waren schon 8 Besucher (11 Hits) hier!  
 
Diese Webseite wurde kostenlos mit Homepage-Baukasten.de erstellt. Willst du auch eine eigene Webseite?
Gratis anmelden