Recycling plant for domestic waste
Input: Domestic waste
Quantity: 30to/h
Working days 250 day/a
Material data: MSW
Material composition not defined
Position Description
De General Project data
Pos. 10 Bag opener / Feeding conveyor
Pos. 10(2) Feed hopper with moving floor conveyor
Pos. 20 Inclining conveyor Pos. 30 Sorting conveyor
Pos. 40 Presorting cabin
Pos. 50 Feeding conveyor screening drum
Pos. 60 Screening drum
Pos. 70 Discharge conveyor overflow drum
Pos. 80 Sorting conveyor
Pos. 90 Ferrous separator
Pos. 95 Separating drum
Pos. 100 Discharge conveyor residues
Pos. 110 Collection conveyor fines
Pos. 120 Discharge conveyor fines
Pos. 130 Discharge conveyor fines
Pos. 140 Ferrous separator
Pos. 145 Separating drum
Pos. 150 Discharge conveyor residues < 90mm
Pos. 160 Discharge conveyor ferrous parts
Pos. 170 Collecting conveyor screen < 300mm
Pos. 180 Intermediate conveyor screen < 300mm
Pos. 190 Feeding conveyor Ballistic separator
Pos. 200 Ballistic Separator
Pos. 220 Discharge conveyor fines STT
Pos. 230 Discharge conveyor flat light STT
Pos. 240 Sorting conveyor
Pos. 250 Collecting conveyor residues
Pos. 260 Ferrous separator
Pos. 265 Separating drum
Pos. 270 Collecting conveyor rolling heavy STT
Pos. 280 Discharge conveyor rolling heavy STT
Pos. 290 Ferrous separator
Pos. 295 Separating drum
Pos. 300 Non-ferrous separator
Pos. 310 Feeding conveyor NIR sensor
Pos. 320 Accelerating conveyor NIR sensor
Pos 330 NIR 1 - optical identification sensor
Pos. 350 Intermediate conveyor NIR
Pos. 360 Sorting conveyor final control
Pos. 370 Accelerating conveyor NIR sensor
Pos. 380 NIR 2 - optical identification sensor
Pos. 400 Sorting conveyor final control
Pos. 410 Passage NIR sensors
Pos. 420 Press feeding conveyor
Pos. 425 Kompressor
Pos. 430 Baler
Pos. 440 Sorting cabin
Pos. 450 Electrical engineering
Pos. 460 Steel construction
Pos. 470 Engineering, Documentation
Pos. 480 Optional mounting and start-up ZB Scope of supply and service
Pos. 10
Bag opener / Feeding conveyor
BagOpener for plastic bags containing householdwaste with feed hopper (approx. 18m³),
working width 1.700 mm
Pos. 01 Schlitz-O-Mat MSW 1-17 - Bag Opener
Pos. 02 Feed and Metering Hopper with Moving Floor Discharge
Pos. 03 Electrical Control System
Pos. 04 Freight, Assembly and Initial Start-up are not included in the offer
The feed hopper of the bag opener is charged per front loader or other feedingmeans. Themoving floor
conveyor inside the feed hopper transports the plastic bags and bulkmaterial into the filling duct of the
machine. The conveying and ripping elements transport the material further into the opening
channel. The hydraulically driven openingmechanism is equipped with ripping fingers. The plastic
bags are opened and almost completely emptied. The contents is being transported to the
subsequent sorting plant in an evenmaterial flow. Thematerial is being discharged over a conveyor
belt provided by the customer.
The machine is designed as a rigid tubular framed and sheetmetal profile construction encased in
a protective covering. The unique features of thismachine provide hard wear and durability against
most difficult conditions. The clearing between the lower edge of the substructure and the upper edge
of the discharge conveyor must not drop below 600 mm.
Due to the positioning, an oil tank cooler is provided.
All rotating elements are furnished with heavy duty, lubricable, encapsulated roller bearings. In order
to attain an optimal opening and discharging capacity, the material passage is variable. This
function adjusts itself automatically to different degrees of sack admission, to large volume and solid
disruptivematerial and to the changing forms of material input. The clamping arms are pressed
against the ripping drums by means of hydraulic cylinders with adjustable pressure.
Themachine is furnished with the required electrical control systemincluding all the necessary
safety and monitoring facilities and corresponds to the current VDE (Association of German
Electrical Engineers) and UV (German Safety) regulations.
Technical Data:
Throughput rate: 6,5 t/h at 50 kg/m³ material density
13 t/h at 100 kg/m³ material density
23 t/h at 200 kg/m³ material density
30 t/h at 300 kg/m³material density
Dimensions: approx. 2.600 x 2.600 x 2.400 mm (L x W x H)
Working Width: approx. 1.700 mm
Drive power: 15 kW
Hydraulic drive: adjustable piston pump for adjusting of the material throughput
Weight: approx. 5 t (without feed hopper)
Layout: hydraulic unit and electric control box fitted directly to the machine
Hydraulic tank size: 250 l (equipped with an oil cooler)
Colour: Colour RAL, at customer's choice
Pos. 10(2)
Feed hopper with moving floor conveyor
Feed hopper in stable sectional stell frame construction. The hopper walls are manufactured
in 4 mm steel sheet with the necessary reinforcements. The hopper volume amounts to
approx. 18 m³.
Moving floor conveyor in stable sectional steel construction. The moving floor is made from
a number of push-boards with fitted wear sheets. The push-boards constist of steel profiles
mounted and guided on wear resistant synthetic material. In groups of three the push-boards
are hydraulically moved. This forward and backward movement provides the conveying
function.
Hydraulic drive unit consisting of the three double acting hydraulic cylinders, the required
hydraulic connecting conduits and a hydraulic unit with the electromagnetically activated
distributing valves, control- and security valves, oil filter, oil tank, etc. complete and operative.
Technical data:
Moving floor position: horizontal
Hopper width: bottom 1.725 mm, top 2.090 mm
Hopper length: approx. 6.000 mm
Hopper volume: approx. 18 m³ (calculated water volume)
Charging height: 2.400 mm
Weight: approx. 7 t (without bag opener)
Transport speed: max. 1,5 m/min, infinitely adjustable
Drive power: 4,0 kW
Hydraulic tank size: 90 l
Colour: colour RAL, at customer's choice
Electronic control system
for Pos. 01 Bag opener
Pos. 02 Feed hopper with moving floor conveyor
Including the switch box (protection type IP 54) fixed to the machine, with main switch, control
and command elements and lamps in the switch box door, and including the EMERGENCY
STOP switches installed to the system.
The electrical equipment complies to the valid VDE (Association of German Electricians) and
UV (accident prevention) regulations.
The main electrical connection is to be installed by you right to the switch box and connected by
an authorised electrican.
Electrical connection: 3 x 400 V, 50 Hz + N + PE, connected approx. 20 kW
Pos. 20
Inclining conveyor
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 20,0
Volume flow [m³/h] : 80
Horizontal length [m] :
Length inclined part [m] : 15,0
Length of gooseneck [m] : 0,75
Belt details
Belt width [mm] : 1650
Type : EP 500/4 4+2
Resistance : Oil and fat
Sealing : Labyrinth – sealing
Specifications
Usable width [mm] : 1500
Nominal height of sideboard [mm] : 600 / 900
Belt velocity [m/s] : 0,30
Dumping height [mm] (theoretical) : 49
Total width [mm] (without motor) : 1892
Total height [mm] : 1120 / 1480
Weight (kg) : 4175
RAL coating : 50 mμ
Electrical data
Power [kW) : 7,5
Charging rate [A] : 15,2
Revolution [1/min] : 17,0
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Thermal classification F : ja
Brake : ja
Separate fan : ja
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : ja
Additives
Supports > 2 m height [number] : 1
Supports 2 – 4 m height [number] : 2
Side wall special / top : nein
Press hopper : nein
Bend [number] : 2
Under pin [m] : 15
Belt covering [m] :
Pit covering : ja
Leack dropping [number] :
Chain oiler (left and right) : ja
Central lubricating point : ja
The chain belt conveyor is a profiled sectional steel construction in screwed and welded design.
As traction mechanisme a double-line bush chain with a separation of 125mm and a diameter of
the rollers of 63mm is used. The vulcanized rubber belt is screwed on C profiles which are
mounted between each second chain-link. For the support the C-profiles move on screwed
guiding rails. On the surface of the belt there are carriers made of angular steel with a distance
of 1 m. All screw fittings are designed with self-locking screw-nuts.
The guiding rails are made of St 52 and are also screwed.
Pos. 30
Sorting conveyor
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 20,0
Volume flow [m³/h] : 80
Distance between centres [m] : 9,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1400
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : open
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 1400
Nominal height of sideboard [mm] : 0
Belt velocity at 50 Hz [m/s] : 0,7
Dumping height [mm] (theoretical) : 23
Total width [mm] (without motor) : 1568
Total height [mm] : 908
Weight (kg) : 1473
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,3
Revolution [1/min] : 39
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew pull switch [number] :
Thermal classification F : ja
Brake : nein
Separate fan : ja
Frequency converter : ja
Thermistor motor protection : ja
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 2
Feed hopper [number] : 1
Discharge chute [number] : 4
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth trough shaped table area of the conveyor. The
conveyor belt structures are made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 320 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized.
The bearing is amply dimensioned with branded flange bearings of 60mm.
Plug wipers clean the interior belt. On plain belts a wiper is mounted at the end of the dropping
side.
Pos. 40
Presorting cabin
Type
Sorting cabin :
Cabin
Length cabin [m] : 6,5
Width cabin [m] : 5,5
Height cabin [m] : 3
Floorspace [m²] : 35,75
Wallspace [m²] : 72
Roofspace [m²] : 35,75
Floor bordering [m] : 24
Roof bordering [m] : 24
Outside bordering [m] : 12
Sorting belt openings [Numb] :
Dropping chute [numb] :
Doors (glas section) [Numb] : 4
Doors [Numb] :
Window 1-piece [Numb] :
Window 3-piece [Numb] : 4
Walkways
Stairs up to 4 m height one flight [Numb] : 2
Stairs up to 4 m height with 1 footpace [Numb] :
Stairs over 4 m height with 1 footpace [Numb] :
Stairs ex 4 m height with 2 footpaces [Numb] :
Platform
Length platform [m] : 6,5
Width platform [m] : 5,5
Height platform [m] : 4
Base platform [m] : 35,8
Self-supporting steel framework with 45 mm thick hard foam panels, surrounded by 0.6 mm
thick galvanised steel plate (RAL 9002). The double groove springs integrated in the hard foam
panels with a labyrinth effect and integrated seal ensure a virtually air-tight and thermal bridgefree
design of the outer wall.
Accessible ceiling design (load-bearing capacity 100 kg/panels). Design of the ceiling same as
wall structure only with 80 mm thick panels.
Window frames made of highly impact-resistant and weather-resistant PVC. The profile system
is equipped with anti-chambers and two all-round compression seals. Corrosion-protected
material reinforcements in the wing and frame profile provide the windows with the necessary
stability. The windows are double-glazed with insulation glass. Glazing 2 x 4 mm float glass with
16 mm air gap. The doors have one leaf and a glass panel. The door leaf is 45mm thick,
rabbeted on two sides, reinforcement made of flat steel.
A mineral fibre plate is used as a heat insulating material. The cabin is illuminated with 500 lux
in the area of the sorting work stations.
The floor construction consists of a steel sub-structure, which is integrated in the sorting
platform. A layer of chip board 22 mm thick (D-s2,d0) is laid on this. Insulation is applied to this
first layer.
This insulation has a heat transition coefficient of 0.29 W/m²K. The next layer applied is another
layer of chip board. The chip board is 38 mm thick and corresponds to the fire classification
B s1 d0. As the last layer, the PVC floor covering is laid in a dish shape. The floor covering
corresponds to the fire classification B1. The slip resistance corresponds to class R. The floor
covering is anti-static (<2kV) and has a thermal resistance coefficient of approx. 0.005 m²K/W.
Pos. 50
Feeding conveyor screening drum
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 15,0
Volume flow [m³/h] : 60
Distance between centres [m] : 7,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1400
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 1250
Nominal height of sideboard [mm] : 500
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 17
Total width [mm] (without motor) : 1568
Total height [mm] : 908
Weight (kg) : 1279
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 2
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] : 7
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 60
Screening drum
Trommel
Transported Material Total dimensions
Waste : 0,25 length [mm] : 10000
Grain size material [mm] : 0-800 Width [mm] : 3500
Tonnage [t/h] : 15,0 Height [mm] : 3000
Volume flow [m³/h] : 60 Weight [t] : 15
Trommel cylinder Electrical Data
Diameter [mm] : 2500 Power [kW] : 2x11
Length [mm] : 15000 Current [A] : 2x22A
Inclination [°] : 3 Revolutions [1 /min] : 9
Voltage : 400 V/50 Hz
Screen plate
The screen plates can vary through the length of the trommel cylinder (different perforations).
Geometry Dimension Length on trommel cylinder Length wrap breakers
round 50 1m keine
square 120 2m 80
round 220 5m 150
The trommel screen consists of a robus steel frame which takes the drive and thrust bearing.
The drive is effected through friction wheels what allows a quiet running.
At the casing, cleaning holes can be found on both sides over the full length.
All rotating parts are provided with a protective enclosure.
The screen plates are designed to be convertable.
Additions
Steel substructure approx. 10t with stairs, walkway width of 1 m on both sides
Feeding chute with labyrinth sealing to trommel and adaption to a feeding conveyor.
Access frontal with "draw bridge" and internal ilummination.
Discharge chute with adaption and discharging coveyor oversized grain.
Chute for undersized grain with sealing to discharging conveyor.
Central lubrification for the trommel bearing
Pos. 70
Discharge conveyor overflow drum
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 13,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1400
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 1250
Nominal height of sideboard [mm] : 500
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 6
Total width [mm] (without motor) : 1568
Total height [mm] : 908
Weight (kg) : 1861
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,6
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 3
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] : 13
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 80
Sorting conveyor
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 28,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1200
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : open
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : ja
Specifications
Usable width [mm] : 1200
Nominal height of sideboard [mm] : 0
Belt velocity [m/s] : 0,7
Dumping height [mm] (theoretical) : 7
Total width [mm] (without motor) : 1368
Total height [mm] : 908
Weight (kg) : 2936
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,3
Revolution [1/min] : 39
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : ja
Brake : nein
Separate fan : ja
Frequency converter : ja
Thermistor motor protection : ja
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 6
Supports 2 – 4 m height [number] :
Feed hopper [number] :
Discharge chute [number] : 16
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : ja
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth trough shaped table area of the conveyor. The
conveyor belt structures are made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 320 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized.
The bearing is amply dimensioned with branded flange bearings of 60mm.
Plug wipers clean the interior belt. On plain belts a wiper is mounted at the end of the dropping
side.
Pos. 90
Ferrous separator
For surrounding temperature until max. 45° Celsius
Protected magnet in permanent design
Measurements:
Width : 1.170 mm
Length : 1.500 mm
Height : 250 mm
Non-magnetically frame construction
Protection against Fe accumulation
Openings between magnetically corpus and frame are closed
Drive:
Drive capacity : 3,00 kW
Connected load : 230/400V rotary current 50 Hz, connected to 400V
Discharge conveyor:
Width : 1.200 mm
Velocity of belt : 1,50 m/s
including stripping plate and protection devices
Colour: machine RAL 6018, protection devices RAL 2000
Pos. 95
Separating drum
For the discharge of Fe including discharge chute
Width : 1.000 mm
Pos. 100
Discharge conveyor residues
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 3,0
Volume flow [m³/h] : 12
Distance between centres [m] : 22,0
Max. Inclination [degree] :
Belt details
Belt width [mm] : 1000
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : ja
Specifications
Usable width [mm] : 850
Nominal height of sideboard [mm] : 500
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 5
Total width [mm] (without motor) : 1168
Total height [mm] : 908
Weight (kg) : 2094
RAL coating : 50 mμ
Electrical data
Power [kW) : 4,0
Charging rate [A] : 8,5
Revolution [1/min] : 74
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 4
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 110
Collection conveyor fines
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 8,0
Volume flow [m³/h] : 32
Distance between centres [m] : 5,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1400
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 125
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 9
Total width [mm] (without motor) : 1568
Total height [mm] : 559
Weight (kg) : 1085
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 2
Supports 2 – 4 m height [number] :
Feed hopper [number] : 2
Discharge chute [number] :
Bend [number] :
Under pin [m] : 5
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 120
Discharge conveyor fines
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 2,0
Volume flow [m³/h] : 8
Distance between centres [m] : 5,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1000
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 850
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 3
Total width [mm] (without motor) : 1168
Total height [mm] : 559
Weight (kg) : 785
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 1
Supports 2 – 4 m height [number] :
Feed hopper [number] :
Discharge chute [number] : 1
Bend [number] :
Under pin [m] : 5
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 130
Discharge conveyor fines
Dimensioning / Transported material
Domestic waste : 0,30
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 17
Distance between centres [m] : 17,5
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1000
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : ja
Specifications
Usable width [mm] : 850
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 7
Total width [mm] (without motor) : 1168
Total height [mm] : 559
Weight (kg) : 1748
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,6
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 2
Supports 2 – 4 m height [number] : 1
Feed hopper [number] : 1
Discharge chute [number] :
Bend [number] :
Under pin [m] : 17
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : ja
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 140
Ferrous separator
For surrounding temperature until max. 45° Celsius
Protected magnet in permanent design
Measurements:
Width : 1.170 mm
Length : 1.500 mm
Height : 250 mm
Non-magnetically frame construction
Protection against Fe accumulation
Openings between magnetically corpus and frame are closed
Drive:
Drive capacity : 3,00 kW
Connected load : 230/400V rotary current 50 Hz, connected to 400V
Discharge conveyor:
Width : 1.200 mm
Velocity of belt : 1,50 m/s
Including stripping plate and protection devices
Colour : machine RAL 6018, protection devices RAL 2000
Pos. 145
Separating drum
For the discharge of Fe including discharge chute
Width : 1.000 mm
Pos. 150
Discharge conveyor residues < 90 mm
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 3,0
Volume flow [m³/h] : 12
Distance between centres [m] : 10
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1000
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 850
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 5
Total width [mm] (without motor) : 1168
Total height [mm] : 559
Weight (kg) : 1170
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 3
Supports 2 – 4 m height [number] :
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] : 10
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 160
Discharge conveyor ferrous parts
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 1,5
Volume flow [m³/h] : 6
Distance between centres [m] : 28,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 800
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : ja
Specifications
Usable width [mm] : 650
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 3
Total width [mm] (without motor) : 968
Total height [mm] : 559
Weight (kg) : 2176
RAL coating : 50 mμ
Electrical data
Power [kW) : 4,0
Charging rate [A] : 8,5
Revolution [1/min] : 74
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 5
Supports 2 – 4 m height [number] :
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] : 28
Belt covering [m] :
Antimagnetic intermediate piece : ja
Antimagnetic head piece : ja
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 170
Collecting conveyor screen < 300 mm
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 12,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1400
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 1250
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 6
Total width [mm] (without motor) : 1568
Total height [mm] : 559
Weight (kg) : 1764
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,6
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 2
Supports 2 – 4 m height [number] :
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] : 12
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 180
Intermediate conveyor screen < 300 mm
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 4,5
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1200
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] : 20
Distance of carriers [mm] : 950
Belt connection on site : nein
Specifications
Usable width [mm] : 1050
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 7
Total width [mm] (without motor) : 1368
Total height [mm] : 559
Weight (kg) : 892
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 2
Supports 2 – 4 m height [number] :
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] : 4,5
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 190
Feeding conveyor Ballistic separator
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 10,0
Volume flow [m³/h] : 40
Distance between centres [m] : 18,5
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1000
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] : 30
Distance of carriers [mm] : 950
Belt connection on site : ja
Specifications
Usable width [mm] : 850
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 16
Total width [mm] (without motor) : 1168
Total height [mm] : 559
Weight (kg) : 1852
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,6
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 1
Supports 2 – 4 m height [number] : 2
Feed hopper [number] : 1
Discharge chute [number] :
Bend [number] :
Under pin [m] : 6
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 200
Ballistic Separator
Type
STT 2000 / 102
Dimensioning / Transported material main data
Domestic waste : 0,25 Length [mm] : 5500
Material grain size [mm] : Width [mm] : 2410
Tonnage [t/h] : 10,0 Height [mm] : 3980
Volume flow [m³/h] : 40 Weight [t] : 8
Paddel Electrical data
Covering deck 1 (top) : 130 square Power [kW] : 2 x 4
Covering deck 2 : 50 square Current [A] : 16
Covering deck 3 : Revolution [1/min] : 216
Voltage : 400 V / 50 Hz
Thermal classification F
Brake :
The throughput ,resp. the density refers to evenly spread material over the width of the
separator (max. 200mm height on the infeed conveyor). The throughput is also depending on
the grain size distribution in the material (specific for each material) - In case of doubts a trial is
recomended. The tonnages refer to relatively dry recycling material.
In order to keep the warranty, the ballistic separator has to be connected to a drive current
control. This control unit is part of the separately available switch cabinet.
Additions
Dust hood yes Chute rolling (3mm) yes
Adaption outer skin yes Chute rolling (6mm) no
Chute flat fraction (3mm) yes Chute fines (lenghtwise) no
Switch cabinet yes Chute fines with manhole yes
A detailed description of the machine is on the additional brochure
Pos. 220
Discharge conveyor fines STT
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 1,0
Volume flow [m³/h] : 4
Distance between centres [m] : 9,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1400
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 1250
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 1
Total width [mm] (without motor) : 1568
Total height [mm] : 559
Weight (kg) : 1473
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,6
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 2
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
Pos. 230
Discharge conveyor flat light STT
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 9,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1400
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 1250
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 6
Total width [mm] (without motor) : 1568
Total height [mm] : 559
Weight (kg) : 1473
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,6
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 2
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 240
Sorting conveyor
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 16,5
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1200
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : open
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : ja
Specifications
Usable width [mm] : 1200
Nominal height of sideboard [mm] : 0
Belt velocity [m/s] : 0,7
Dumping height [mm] (theoretical) : 7
Total width [mm] (without motor) : 1368
Total height [mm] : 908
Weight (kg) : 1936
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,3
Revolution [1/min] : 39
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : ja
Brake : nein
Separate fan : ja
Frequency converter : ja
Thermistor motor protection : ja
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 4
Supports 2 – 4 m height [number] :
Feed hopper [number] :
Discharge chute [number] : 10
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth trough shaped table area of the conveyor. The
conveyor belt structures are made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 320 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized.
The bearing is amply dimensioned with branded flange bearings of 60mm.
Plug wipers clean the interior belt. On plain belts a wiper is mounted at the end of the dropping
side.
Pos. 250
Collecting conveyor residues
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 35,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1200
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : ja
Specifications
Usable width [mm] : 1050
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 7
Total width [mm] (without motor) : 1368
Total height [mm] : 559
Weight (kg) : 3545
RAL coating : 50 mμ
Electrical data
Power [kW) : 4,0
Charging rate [A] : 8,5
Revolution [1/min] : 74
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 3
Feed hopper [number] : 3
Discharge chute [number] :
Bend [number] :
Under pin [m] : 35
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : ja
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 260
Ferrous separator
For surrounding temperature until max. 45° Celsius
Protected magnet in permanent design
Measurements:
Width : 1.170 mm
Length : 1.500 mm
Height : 250 mm
Non-magnetically frame construction
Protection against Fe accumulation
Openings between magnetically corpus and frame are closed
Drive:
Drive capacity : 3,00 kW
Connected load : 230/400V rotary current 50 Hz, connected to 400V
Discharge conveyor:
Width : 1.200 mm
Velocity of belt : 1,50 m/s
including stripping plate and protection devices
Colour : machine RAL 6018, protection devices RAL 2000
Pos. 265
Separating drum
For the discharge of Fe including discharge chute
Width : 1.000 mm
Pos. 270
Collecting conveyor rolling heavy STT
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 5,5
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1200
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] : 20
Distance of carriers [mm] : 950
Belt connection on site : ja
Specifications
Usable width [mm] : 1050
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 7
Total width [mm] (without motor) : 1368
Total height [mm] : 559
Weight (kg) : 979
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 1
Feed hopper [number] : 2
Discharge chute [number] :
Bend [number] :
Under pin [m] : 5,5
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 280
Discharge conveyor rolling heavy STT
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 9,5
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 800
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] : 20
Distance of carriers [mm] : 950
Belt connection on site : nein
Specifications
Usable width [mm] : 650
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 11
Total width [mm] (without motor) : 968
Total height [mm] : 559
Weight (kg) : 937
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 1
Feed hopper [number] : 2
Discharge chute [number] :
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 290
Ferrous separator
For surrounding temperature until max. 45° Celsius
Protected magnet in permanent design
Measurements:
Width : 1.170 mm
Length : 1.500 mm
Height : 250 mm
Non-magnetically frame construction
Protection against Fe accumulation
Openings between magnetically corpus and frame are closed
Drive:
Drive capacity : 3,00 kW
Connected load : 230/400V rotary current 50 Hz, connected to 400V
Discharge conveyor:
Width : 1.200 mm
Velocity of belt : 1,50 m/s
including stripping plate and protection devices
Colour : machine RAL 6018, protection devices RAL 2000
Pos. 295
Separating drum
For the discharge of Fe including discharge chute
Width : 1.000 mm
Pos. 300
Non-ferrous separator
Application
The application fields of the non-ferrous separators are numerous. Valuable metals can be
recuperated from automobile scrap- and cable processing. The recycling of valuable substances
as well as glass recycling become economical through the non-ferrous separator. In simple
terms, the non-ferrous separator is a separation magnet for nonmagnetic metals like aluminium
and copper. Due to quickly changing magnetic fields various materials are separated. The
operation within the bulk goods are removed by an additional magnetic belt separator whereby
the non-ferrous separation is improved. In contrast to electromagnetically working eddy-current
separators permanent magnetic separators do not need energy for generating a magnetic field
but for driving the magnetic system. They are thus environmentally beneficial and particularly
economical. Due to the compact design non-ferrous separators can be reinstalled into already
existing plants without any problems.
Technical data
working width 1.200 mm
with high temperature and wear-resisting rotor casing
drive of magnetic rotor via frequency-controlled three-phase current motor
connection to 400 V three-phase current, 50 Hz, 4,0 kW
wear-free electric braking of rotor in case of power failure and emergency
including conveyor belt with 40 mm high corrugated wave, one rib and V-belt profile
installed inside for holding the belt in the correct position
belt drive with frequency-controlled three-phase current gear motor for the connection
to 230 / 400 V three-phase current, 50 Hz, 0,75 kW
belt speed adjustable from 0,5 to 2,0 m/sec.
sealing of interior space between belt and rotor
convenient and quick: with universal adjustment device for the separating edge
Pos. 310
Feeding conveyor NIR sensor
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 25,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1400
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] : 20
Distance of carriers [mm] : 950
Belt connection on site : ja
Specifications
Usable width [mm] : 1250
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 6
Total width [mm] (without motor) : 1568
Total height [mm] : 559
Weight (kg) : 3025
RAL coating : 50 mμ
Electrical data
Power [kW) : 4,0
Charging rate [A] : 8,5
Revolution [1/min] : 74
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 5
Feed hopper [number] : 2
Discharge chute [number] :
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 320
Accelerating conveyor NIR sensor
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 6,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1500
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : lip seal
Belt connection on site : nein
Specifications
Usable width [mm] : 1350
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 2,3
Dumping height [mm] (theoretical) : 2
Total width [mm] (without motor) : 1668
Total height [mm] : 559
Weight (kg) : 1262
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,6
Revolution [1/min] : 190,0
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : ja
Separate fan : ja
Frequency converter : ja
Thermistor motor protection : ja
Overspeed trip : nein
Capacity separating drum [kW] : 0,18
Drawing of current sep. Drum [A] : 0,55
Additives
Supports > 2 m height [number] : 2
Supports 2 – 4 m height [number] :
Feed hopper [number] : 1
Discharge chute [number] :
Under pin [m] :
Belt covering [m] :
Central lubricating point : nein
Hood
Hood for NIR width 1400
The belt movement is sliding on the smooth table area of the conveyor. The construction
of the conveyor is similar to the sliding belt conveyor (GG). The driving-drum is not rubberized to
avoid unbalances and therefore oscillations under higher speeds. The electric drive is installed
"shovingly" to grant the access to the guide rail of the valves. The belt sealing to the side wall is
designed as a grinding lip seal but with smooth
sealing lips to allow a higher belt velocity. The discharge hood shows
a maintenance door and an adjustable guide plate.
Adjustable retainers for the guide rails of the valves and for the separating drum are also
installed in the painted hood. The separating drum has a diameter of 135mm ( belt 2900mm /
220 mm) and is driven with 12 1/min.
Pos. 330
NIR 1 – optical identification sensor
Polysort B 1400 (PE, PP)
NIR-Unit TiTech PolySort for the positive sorting. The TiTech PolySort combines the efficiency
of the TiTech Autosort unit and the opportunity to choose between different sorting tasks. The
operator may choose sorting task at any time by making the appopriate selection from on a
simple and self-explanatory colour display. A password is available to prevent unwanted
intervention.
The TiTech PolySort is able to sort any of the below fractions:
Liquids cartons (FKN)
Polyethylene (PE)
Polypropylene (PP)
Polyethyleneterephtalate (PET)
Expanded Polystyrene (EPS)
Polyvinyl chloride (PVC)
Polycarbonate (PC)
Paper/Carton/Cardboard/Other combinations based on paper (PKK/SV)
Aluminium* (AL)
Other materials on enquiry
Combinations of the foregoing (e.g. GK ~ PPK/SV ~ AL = PGA) are feasible.
Only with the combination PGA. The PGA setting was developed for when the sorting
system is used on light goods with air separators to handle the plastics that result.
The TiTech PolySort consists of:
Recognition system (scanner) with lamps
Operating unit with modem connection
Nozzle strip with comprssed air control unit
All ancillary documentation (English, German, Spanish, Italian and French versions avail)
Electric and pneumatic wiring/ducting for each components
Pos. 350
Intermediate conveyor NIR
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 2,5
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 800
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 650
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 11
Total width [mm] (without motor) : 968
Total height [mm] : 559
Weight (kg) : 468
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 1
Supports 2 – 4 m height [number] :
Feed hopper [number] : 2
Discharge chute [number] :
Bend [number] :
Under pin [m] : 2,5
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 360
Sorting conveyor final control
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 5,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 800
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : open
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 800
Nominal height of sideboard [mm] : 0
Belt velocity [m/s] : 0,7
Dumping height [mm] (theoretical) : 10
Total width [mm] (without motor) : 968
Total height [mm] : 908
Weight (kg) : 635
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,3
Revolution [1/min] : 39
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : ja
Brake : nein
Separate fan : ja
Frequency converter : ja
Thermistor motor protection : ja
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 2
Supports 2 – 4 m height [number] :
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth trough shaped table area of the conveyor. The
conveyor belt structures are made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 320 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized.
The bearing is amply dimensioned with branded flange bearings of 60mm.
Plug wipers clean the interior belt. On plain belts a wiper is mounted at the end of the dropping
side.
Pos. 370
Accelerating conveyor NIR sensor
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 4,5
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 1100
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : lip seal
Belt connection on site : nein
Specifications
Usable width [mm] : 950
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 2,3
Dumping height [mm] (theoretical) : 3
Total width [mm] (without motor) : 1268
Total height [mm] : 559
Weight (kg) : 819
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,6
Revolution [1/min] : 190,0
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : ja
Separate fan : ja
Frequency converter : ja
Thermistor motor protection : ja
Overspeed trip : nein
Capacity separating drum [kW] : 0,18
Drawing of current sep. Drum [A] : 0,55
Additives
Supports > 2 m height [number] :
Supports 2 – 4 m height [number] : 2
Feed hopper [number] : 1
Discharge chute [number] :
Under pin [m] :
Belt covering [m] :
Central lubricating point : nein
Hood
Hood for NIR width 1000
The belt movement is sliding on the smooth table area of the conveyor. The construction
of the conveyor is similar to the sliding belt conveyor (GG). The driving-drum is not rubberized to
avoid unbalances and therefore oscillations under higher speeds. The electric drive is installed
"shovingly" to grant the access to the guide rail of the valves. The belt sealing to the side wall is
designed as a grinding lip seal but with smooth
sealing lips to allow a higher belt velocity. The discharge hood shows
a maintenance door and an adjustable guide plate.
Adjustable retainers for the guide rails of the valves and for the separating drum are also
installed in the painted hood. The separating drum has a diameter of 135mm ( belt 2900mm /
220 mm) and is driven with 12 1/min.
Pos. 380
NIR 2 – optical identification sensor
Polysort B 1400 (PE, PP)
NIR-Unit TiTech PolySort for the positive sorting. The TiTech PolySort combines the efficiency
of the TiTech Autosort unit and the opportunity to choose between different sorting tasks. The
operator may choose sorting task at any time by making the appopriate selection from on a
simple and self-explanatory colour display. A password is available to prevent unwanted
intervention.
The TiTech PolySort is able to sort any of the below fractions:
Liquids cartons (FKN)
Polyethylene (PE)
Polypropylene (PP)
Polyethyleneterephtalate (PET)
Expanded Polystyrene (EPS)
Polyvinyl chloride (PVC)
Polycarbonate (PC)
Paper/Carton/Cardboard/Other combinations based on paper (PKK/SV)
Aluminium* (AL)
Other materials on enquiry
Combinations of the foregoing (e.g. GK ~ PPK/SV ~ AL = PGA) are feasible.
Only with the combination PGA. The PGA setting was developed for when the sorting
system is used on light goods with air separators to handle the plastics that result.
The TiTech PolySort consists of:
Recognition system (scanner) with lamps
Operating unit with modem connection
Nozzle strip with comprssed air control unit
All ancillary documentation (English, German, Spanish, Italian and French versions avail)
Electric and pneumatic wiring/ducting for each components
Pos. 400
Sorting conveyor final control
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 5,0
Volume flow [m³/h] : 20
Distance between centres [m] : 6,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 800
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : open
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 800
Nominal height of sideboard [mm] : 0
Belt velocity [m/s] : 0,7
Dumping height [mm] (theoretical) : 10
Total width [mm] (without motor) : 968
Total height [mm] : 908
Weight (kg) : 702
RAL coating : 50 mμ
Electrical data
Power [kW) : 3,0
Charging rate [A] : 6,3
Revolution [1/min] : 39
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : ja
Brake : nein
Separate fan : ja
Frequency converter : ja
Thermistor motor protection : ja
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 2
Supports 2 – 4 m height [number] :
Feed hopper [number] : 1
Discharge chute [number] : 1
Bend [number] :
Under pin [m] :
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : ja
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth trough shaped table area of the conveyor. The
conveyor belt structures are made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 320 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized.
The bearing is amply dimensioned with branded flange bearings of 60mm.
Plug wipers clean the interior belt. On plain belts a wiper is mounted at the end of the dropping
side.
Pos. 410
Passage NIR sensors
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 2,0
Volume flow [m³/h] : 8
Distance between centres [m] : 5,0
Max. Inclination [degree] : 0°
Belt details
Belt width [mm] : 800
Belt quality : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Height of carriers [mm] :
Distance of carriers [mm] :
Belt connection on site : nein
Specifications
Usable width [mm] : 650
Nominal height of sideboard [mm] : 200
Belt velocity [m/s] : 0,8
Dumping height [mm] (theoretical) : 4
Total width [mm] (without motor) : 968
Total height [mm] : 559
Weight (kg) : 635
RAL coating : 50 mμ
Electrical data
Power [kW) : 2,2
Charging rate [A] : 5,0
Revolution [1/min] : 72
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Scew control switch [number] :
Thermal classification F : nein
Brake : nein
Separate fan : nein
Frequency converter : nein
Thermistor motor protection : nein
Overspeed trip : nein
Softstarter : nein
Additives
Supports > 2 m height [number] : 1
Supports 2 – 4 m height [number] :
Feed hopper [number] : 2
Discharge chute [number] : 1
Bend [number] :
Under pin [m] : 5
Belt covering [m] :
Antimagnetic intermediate piece : nein
Antimagnetic head piece : nein
Rollers rubberized : nein
Central lubricating point : nein
Reversible : nein
Impact protection [m] :
The belt movement is sliding on the smooth table area of the conveyor.
The conveyor belt structure is made of a robust profiled sectional steel construction.
The electric drive is effected by a bevel gear drive motor type SEW. Driving- and guide-drums
have a diameter of 220 mm (spherical) with a crowned finish in order to obtain an optimal
guiding of the belt. The dismounting of the driving- and guide-drums is to be effected in axial
direction through the frame of the conveyor. The driving drum is rubberized from a distance
between centres of 10 m and more. The bearing is amply dimensioned with branded flange
bearings of 60mm. Plug wipers clean the interior belt. On plain belts a wiper is mounted at the
end of the dropping side.
The belt sealing towards the sideboard can be engineered on request as a mild grinding lip seal
or as a non-touching labyrinth-sealing.
Pos. 420
Press feeding conveyor
Dimensioning / Transported material
Domestic waste : 0,25
Tonnage [t/h] : 15,0
Volume flow [m³/h] : 60
Horizontal length [m] : 40,0
Length inclined part [m] :
Length of gooseneck [m] : 0,75
Belt details
Belt width [mm] : 1650
Tyoe : EP 400 / 3 2+0
Resistance : Oil and fat
Sealing : labyrinth-sealing
Specifications
Usable width [mm] : 1500
Nominal height of sideboard [mm] : 600 / 900
Belt velocity [m/s] : 0,30
Dumping height [mm] (theoretical) : 37
Total width [mm] (without motor) : 1892
Total height [mm] : 1120 / 1480
Weight (kg) : 9675
RAL coating : 50 mμ
Electrical data
Power [kW) : 7,5
Charging rate [A] : 15,2
Revolution [1/min] : 17,0
Voltage : 400 V / 50 Hz
Cable pull switch [number] :
Thermal classification F : ja
Brake : ja
Separate fan : ja
Frequency converter : ja
Thermistor motor protection : ja
Overspeed trip : ja
Softstarter : ja
Additives
Supports > 2 m height [number] : 1
Supports 2 – 4 m height [number] : 1
Side wall special / top : nein
Press hopper : ja
Bend [number] : 2
Under pin [m] : 10
Belt covering [m] :
Pit covering : ja
Leack dropping [number] :
Chain oiler (left and right) : ja
Central lubricating point : ja
The chain belt conveyor is a profiled sectional steel construction in screwes and welded design,
As traction mechanisme a double- line bush chain with a separation of 125 mm and a diameter
of the rollers of 63 mm is used. The vulcanized rubber belt is screwed on C profiles which are
mounted between each second chain-link. For the support the C- profiles move on screwed
guiding rails. On the surface of the belt there are carriers made of angular steel with a distance
of 1 m. All screw fittings are designed with self-locking screw-nuts.
The guiding rails are made of St. 52 and are also screwed.
Pos. 425
Kompressor
1. Allgemeines
FürdieDruckluftversorgungderAnlageisteinKompressorineinemseparatenKompressor Raum
siehe Zeichnung vorgesehen.
Die vom Kompressor produzierte Druckluft wird verwendet für :
1.) Abreinigung Filteranlage I - II
2.) Entnahme Stellen zu Reparatur- und Wartungszwecken
2. Kompressor
Hersteller : A t l a s C o p c o
Bezeichnung : GA 22- 10 E 1 FF
Art des Kompressor : Schraubenkompressor
Betriebsdruck 10 (bar)
Höchstdruck : 10 (bar)
Liefermenge : 3,1 (m³/min)
(bei Betriebsdruck)
Erforderliche Liefermenge : 3,0 (m³/min)
(bei Höchstdruck)
elektrische Gesamtleistung : Nennleistung Kompressoranlage 22 KW /
Gesamtleistung inkl. Nebenaggregaten – ohne
Heizung: 28,7 KW (kW)
(incl. nachfolgend aufgeführte Ausstattungen)
Zusätzliche Ausstattungen :
Heizung Kompressor (Betriebsbereit im Leerlauf bis – 10° Umgebungstemperatur)(650,00 €)
Ölwassertrenner – Öwamat 2 (390,00€) + Heizung (220,00€ )
Kondensattrockner (in Pos. Kompressor enthalten)
Kondensatablass - mind. 20 l Auffangbehälter mit Heizung (350,00€ )
Möglichkeit des Betriebes des Kompressors ohne Trockner bei tiefen Temperaturen (< -1 0C°)
Bypass mit Kondensatablass und Heizung (700,00€)
Aktivkohlefilter – Filterkombination 3-fach ( DD 60 / PD 60 / QD 60 ) (730,00€ )
DasabgeschiedeneWasserdesAktivkohlefiltersistebenfallsindenAuffangbehälterdes
Kondensattrocknerszuleiten
Pos. 430
Baler
PresonafullyautomaticbalerLP50EH2
Pos. 440
Sorting cabin
Type
Sorting cabin
Cabin
Length cabin [m] : 25
Width cabin [m] : 9
Height cabin [m] : 3
Floorspace [m²] : 225
Wallspace [m²] : 204
Roofspace [m²] : 225
Floor bordering [m] : 68
Roof bordering [m] : 68
Outside bordering [m] : 12
Sorting belt openings [Numb] : 26
Dropping chute [numb] :
Doors (glas section) [Numb] : 6
Doors [Numb] :
Window 1-piece [Numb] :
Window 3-piece [Numb] : 8
Walkways
Stairs up to 4 m height one flight [Numb] :
Stairs up to 4 m height with 1 footpace [Numb] : 4
Stairs over 4 m height with 1 footpace [Numb] :
Stairs ex 4 m height with 2 footpaces [Numb] :
Platform
Length platform [m] : 7
Width platform [m] : 7
Height platform [m] : 4
Base platform [m] : 49,0
Self-supporting steel framework with 45 mm thick hard foam panels, surrounded by 0.6 mm
thick galvanised steel plate (RAL 9002). The double groove springs integrated in the hard foam
panels with a labyrinth effect and integrated seal ensure a virtually air-tight and thermal bridgefree
design of the outer wall.
Accessible ceiling design (load-bearing capacity 100 kg/panels). Design of the ceiling same as
wall structure only with 80 mm thick panels.
Window frames made of highly impact-resistant and weather-resistant PVC. The profile system
is equipped with anti-chambers and two all-round compression seals. Corrosion-protected
material reinforcements in the wing and frame profile provide the windows with the necessary
stability. The windows are double-glazed with insulation glass. Glazing 2 x 4 mm float glass with
16 mm air gap. The doors have one leaf and a glass panel. The door leaf is 45mm thick,
rabbeted on two sides, reinforcement made of flat steel.
A mineral fibre plate is used as a heat insulating material. The cabin is illuminated with 500 lux
in the area of the sorting work stations.
The floor construction consists of a steel sub-structure, which is integrated in the sorting
platform. A layer of chip board 22 mm thick (D-s2,d0) is laid on this. Insulation is applied to this
first layer.
This insulation has a heat transition coefficient of 0.29 W/m²K. The next layer applied is another
layer of chip board. The chip board is 38 mm thick and corresponds to the fire classification B s1
d0. As the last layer, the PVC floor covering is laid in a dish shape. The floor covering
corresponds to the fire classification B1. The slip resistance corresponds to class R. The floor
covering is anti-static (<2kV) and has a thermal resistance coefficient of approx. 0.005 m²K/W.
Heating and ventilation, simple design without Air Condition
9 Sidewalls of boxes (9m x 3m each)
Pos. 450
Electrical engineering
Design of the electro-plan and control cabinet
A control cabinet with all input and output circuits which are necessary for the operating of the
plant is constructed.
The plant is equipped with an alarm horn and a flashing alarm lamp.
The client provides a closed room for the control cabinet.
Programmable Logic Controller (PLC) programming
Design of the PLC
- Automatic operation
- Manual operation
- Interference analysis with display
Electrical installation without in-feed to be delivered by the client
- Motor and control circuits as Ölflex-Number-Cable 110
- Passed in cable channels or tubes
- Cables are labelled at the ends
- Connection of cables to motors and external positions of the controller through
armoured screwing - No separated channels for controlling and power circuits
- Motors up to 7,5 KW pluggable over Cekon-plugs (not applicable on frequency
controlled drives)
The electrical installation including installation material for example emergency stop
switches, start and stop switches, cables etc. are not included in this offer.
Start-up of the entire electronics
Start-up of the plant with different operating types
For the checking of all functions the entire plant must be available and operational for 3 working
days.
Documentation (duplicate A4) in English
- Sequential diagram
- Mounting plans
- Material lists
- Cable list
Pos. 460
Steel construction
The general steel construction allows to walk around all machines, cabins and aggregates for
maintenance and inspection on one level. The construction mainly consists of rolled steel
sections (sand streamed and conserved) and is designed very rigid to avoid vibrations. The
thickness of the surface coating is standard 60 mμ (2K-HS-Acrylic-Single-coat lacquer). The
steel construction is strongly screwed to the cement floo (preferably SLW 60) through heavyduty
dowels.
All walkways, stairways, guard rails, step ladders are manufactured and calculated according to
EN ISO 14122. The guard rails consist of handrails, knee rails and foot rails.
Steel construction towers
Screening drums
Ballistic separators
Fe separators / non-ferrous separators Fe separators singles (3 pcs.)
NIR separators
Steel construction for sorting cabins are included in the individual positions
Pos. 470
Engineering, Documentation
The mbs® company plans the whole plant in close collaboration and agreement with the client.
The client makes available to the contractor all necessary documents of the customer supplied
units. The plant is designed by the contractor to the highest standards. All regulations valid for
this type of plant are observed. The necessary safety installations are included in this offer.
The licensing requirements which have been given to the contractor in writing until the submittal
of quotation are included in this offer. All other regulations are not part of the scope of supply
and services.
The contractor issues to the client a CE-declaration of conformity (complete plant) or a
CE-declaration of manufacturer (components). To obtain a CE-declaration of conformity the
contractor must be given all CE-declarations of manufacturer of the units supplied by the
customer and if so of all existing plant parts. For the contractor it is only possible to issue a
declaration of conformity after handing over all declarations of manufacturer as mentioned
above. Until this moment the contractor can only hand over the declarations of manufacturer of
the individual components to the client.
Planning documents:
Layout plant
Mounting schedule
Documentation:
The client receives a printed documentation in duplicate in a ring binder and one in electrical
version on CD.
The documentation is in English.
Instruction:
After the end of installation the employees chosen by the client are trained in operating the
equipment by our project and installation manager.
During this training all safety issues are explained and shown to them on site.
The maintenance and operating instructions are discussed in detail and are shown on the
machines. At specific machines further training is undertaken.
With the same employees the training of the control and visualisation is done.
The attention is especially turned to the treatment of interferences.
After the training all participants have to sign a training report.
Pos. 480
Optional mounting and start up
The mechanical mounting and cold and/or warm start-ups are not included in this offer. We
propose to place two head-workmen for the installation of the offered equipment on a time and
material basis.
Daily rate for one head-workman 750,00 € / day
Including travelling and accommodation costs
Lifting devices to be paced at disposal by the client
Scope of supply and service
The engineering services of complete plants contain the layout plan, the operating instructions
in duplicate as well as the CE declaration of conformity.
Not included in the scope of supply and service are:
- Masonry and mortising works, earth removals and concrete foundations, fretworks and
fretwork closings.
- Statical calculations and threat analyses.
- Building site lightening, electrical energy, water supply and waste water.
- Manufacturing aid, manufacturing material for trials and test run.
- Current entry to switch cabinet.
All services not especified are not included in this offer. The client is responsible for fire
protection requiremen Fire-watch has to be provided by the customer for the period required.
Differences in floor level up to 3 cm, based on the floor space will be graduated by …®,
additional expenditures caused by bigger discrepan bears the builder. Erection and construction
clearances have to be provided for at relevant locations Sanitary facilities and dressing rooms at
site are allowed to be used by the mounting personel of …®.
Guarantee
The supplier grants a 12 months, or maximum 3.500 h working hours, guarantee on all new
plant parts except wear and tear parts, subject to a conventional use in a normal operation. The
guarantee commences with the start-up of the plant, however 6 weeks after supply at the latest.
Pricing term ex works, plus legal VAT
Price is calculated without transportation costs, customs duties, taxes, exportation expenses or
any other fee and charges which may occur.
Terms of payment
40 % at placement of order
60 % before delivery
Period allowed for payment
14 days net, without any deduction of discounts, without money transfer costs, to one of our
bank accounts. Is the payment delayed, the contractor can stop project works. All scheduled
tasks will delay minimum for the period of payment delay.
Time of delivery on agreement
The time of delivery is valid after mutual signment of confirmation of order, after final
commercial and technical clarification and after receipt of prepayment
Binding period
This offer is valid for 3 months
